|
Setting Up Sentinel-CPM and Sentinel-VM modules
When working on setup parameters for an MMS Sentinel-CPM or Sentinel-VM module, it is sometimes necessary to switch between the View Data or View Curves screen and the
Change Setup screens while making changes in the setup and looking at the effect of the setup change. An example of this would be setting the TDC offset parameter while looking at the View Curves screen to see the impact of the offset change. The challenge for this process is that each time you select the Change Setup screen, the module asks you to log in with a Username, Password and Module Serial Number.
There is an easy way to avoid having to log in multiple times. You can open 2 tabs in the web browser that you are using: one for the Change Setup screen and another whatever other item you need to look at (e.g., View Curves or View Data). Following is a step-by-step to accomplish this.
For this example, I am using a Sentinel-CPM module; but the process will work the same for a Sentinel-VM module. First, open the interface to the module by typing in the IP address and Port number into the web browser. Figure 1 shows the web browser open on the Sentinel-CPM module at 96:60:54:78:5002
| 
