Featured Job

Matcom was hired by Kenaidan to transport two draft fans – both weighing in at around 15, 000 pounds – from storage to their nearby facility. Our crew of five successfully mobilized the fans down to the lower level. The entrance to the lower floor measured 20 feet by 20 feet and the exhaust fans were eight feet, 15 000 pounds.

Led by Project Manager, Ali Chitaz.

Scope of Work

Our original plan was to solely use forklifts; the forklifts would lower the fans eight feet down with its boom. A Brief overview of This Project: Peaked at a crew of 5 people  State of the art tools : forklifts (4,000 lbs. ~ 15,000 lbs.), equipment for gantry set up

Challenge & Solution

Upon arrival we noticed the structural engineer placed a shore on the floor. The total weight our 25, 000 pound forklift and 15, 000 pound fans would overwhelm and crowd the shoring structure. Instead, we pivoted towards a gantry strategy. Between the Project Manager and Foreperson Supervisor, we devised a plan with the new variables in mind. The team used forklifts to transport the fan from storage to the designated room. From there, the fan was placed on dollies and pushed towards the pitfall. The fans were rigged one-by-one to the gantry and lowered to the lower floor. The fans were a dynamic load and the center of gravity of the fan was off-set. The fans had to be lowered horizontally, one leg at a time.

Results    Utilizing our team of riggers and the gantry saved our client time and money. The job was quoted as a budgetary price not to exceed. Truthfully, the job was finished sooner than anticipated with the gantry system–leaving the client with a discount. We are pleased to note there were no claims made or property damage upon finishing the job. In addition to a very satisfied customer, the job was completed with no Recordable Injuries/Illnesses.

‌ ‌ ‌ ‌