As crews continue construction on the SR 60/Central Avenue project there will be intermittent lane closures this week (through traffic will remain at all times).:

• SR 60 at Central Avenue between the on- and off-ramps 10:00 p.m. to 5:00 a.m. on Wednesday, February 8 and Thursday, February 9 (into Friday morning).
• Central Avenue Bridge from 9:00 p.m. to 5:00 a.m. on Thursday, February 9 (into Friday morning).

At times work throughout the corridor may be loud and cause vibration. Please remember all construction is dynamic and the schedule is weather-permitting and subject to change.



Si prefiere recibir información de construcción en español, llame al (877) 55-SBCTA.

Crews pouring concrete onto the SR 60/Central Avenue eastbound on-ramp and Central Avenue.

Starting the last weekend in February, crews will begin a series of six directional 55-hour freeway closures on SR 210 as part of the SR 210 Lane Addition and Base Line Interchange Project. These closures will be taken one direction at a time over select weekends. The closures will allow crews to safely perform paving operations on eastbound and westbound SR 210 at the on- and off-ramp junctures of the San Bernardino Avenue interchange. 

The closures will take place during weekends from Friday at 10:00 p.m. to Monday at 5:00 a.m.  Drivers will be directed to use I-215 and I-10 as alternate routes during these closures.

SBCTA will host an informational webinar via Zoom on Thursday, February 16 at 6:00 p.m. To register, visit bit.ly/SR210Webinar. For additional information, visit goSBCTA.com/SR210BaseLine.

In an effort to improve traffic flow along Central Avenue and access to SR 60, the San Bernardino County Transportation Authority (SBCTA) and the City of Chino, in cooperation with the Caltrans District 8, will widen the Central Avenue interchange at the SR 60 bridge to accommodate three through-lanes and double left-turn lanes in both direction and will widen the existing eastbound and westbound on-ramps to SR 60 from one lane to two through lanes and a carpool lane. The project is designed to relieve congestion and improve traffic flow as well as address the increased travel associated with existing and planned development in the City of Chino. The project also will modify the bridge to meet seismic requirements and provide American with Disabilities Act (ADA) compliant curb ramps and tactile sensors at intersections where crosswalks are included.