Round Cable Entry for Standard Round Knock-Outs
58TP Accu-CoderPro™ Programmable Encoder
Roxtec RG M63 Entry Seal
 

Roxtec cable and pipe seals are a truly flexible sealing system for the manufacturing industry. Multidiameter™ - innovative solution for adaptability simplifies design, installation and maintenance. These sealing modules have removable layers enabling a perfect fit to cables and pipes of different sizes.

The Roxtec RG M63 is a round entry seal for multiple cables. The transit fits standard ISO 63 knock-outs and can accommodate from 1 to 9 cables. This cable gland option is available in nickel-plated brass or 316L stainless steel. The product is supplied as ready-made kits which include all necessary components.
Programmable resolution, waveform, & output type

The Model 58TP programmable 58 mm Accu-CoderPro™ thru-bore encoder is specifically designed for the challenges of an industrial environment. Its advanced set of electronics allow the encoder to be programmed to meet your exact application needs. Using EPC’s optional USB programming module, users may select from 6 output types, choose from 32 different waveforms, and select any resolution from 1 to 65,536 CPR (that’s 262,144 counts in full quadrature). This allows a single encoder to be configured for multiple applications, allowing one encoder to replace many different part numbers, providing significant cost savings on inventory and downtime replacement costs.
8-Port ECO Unmanaged Switch
ELECYLINDER®
Low cost option for networking
 
WAGO introduces our new 8 port 10/100Mb/s Ethernet switch. This new ECOnomical switch provides users with a low-cost option for networking up to 8 devices. The switch has an expansive voltage range of 12 to 48 VDC with overvoltage protection enabling application flexibility.

The wide operating temperature of -40 °C to +70 °C / -40 °F to +158 °F enables engineers to use this cost-effective option in an extensive number of applications.

The compact design with intuitive DIN RAIL adapter allows for easy installation in the control cabinet or junction box.
Easily switching from air to electric

ELECYLINDER® is designed as a replacement for pneumatic cylinders featuring simplicity from start-up to maintenance. Speed / Acceleration settings can be set in just 5 minutes. You can also operate it with ON / OFF signals, like a solenoid valve with no time-consuming programming necessary.
 
The ELECYLINDER® can start and stop smoothly at high velocity, reducing cycle time.
  • Start and end points can be set at any value
  • Battery-less absolute encoder means no maintenance required
  • Built-in controller requires no control panel space
Sun Automation | 2900 S.Gilbert Road, Suite 2 | Chandler, AZ 85286

Phone: 480-929-0464  email: sales@sunautomationinc.com