Minimize Light Leakage & Scatter by Edge Printing Display Cover & Enhancement Glass
Unframed and flush mounted display cover and enhancement filter glass can sometimes allow undesired “backlight” bleeding or light leakage/scatter to emanate from the display edges and corners. This can occur when the border of the display glass is not fully integrated, covered or masked in some way. “Backlight” bleeding is problematic as it can be distracting to the viewer, particularly when viewing dark screens in low lighting conditions.
Abrisa Technologies provides edge printed solutions for display cover and enhancement glass that minimizes “backlight” bleeding where we add opaque borders of epoxy or frit ink to block the pathways when it is undesirable for light to exit. The application of the black or other opaque PMS color matched ink is compatible with bonding requirements and specifications and can be applied to glass substrates as small as ¼” square or up to an 80” diagonal. The ink can be applied to glass as thin as 0.7 mm up to 1” in thickness with ink profiles down to 0.0003” and tolerances of ±0.010.”
