Internal Production of Disinfectant
|
|
Hello,
In an effort to stay on top of the ever-changing needs of each program, our administrative staff have been monitoring our supply levels of necessary supplies at the programs and adding to the stockpiles as necessary. Our DSP staff members have been closely following our established deep cleaning procedures by washing and disinfecting heavily used surfaces every four (4) hours and we are thankful to see this happening. But, this has unfortunately led to us using up the majority of our supply of Clorox and Lysol disinfecting wipes over the last seven weeks. These products have become more and more difficult to purchase commercially, so beginning next week, L.I.F.E. Inc. will pivot to begin producing disinfectant spray internally for all of our programs. This product will be more concentrated and effective than the residential-strength wipes we have been using, so we wanted to take a moment to explain what we'll be providing.
|
|
As an agency, we will be utilizing
Husky® 802 High Fragrance Detergent/Disinfectant beginning next week or whenever the program's current supply of Lysol wipes is depleted. Husky® 802 is a concentrated, high-fragrance, ammonium-based disinfectant cleaner designed to control bacterial growth and eliminate odor-causing microorganisms. The Environmental Protection Agency (EPA) classifies this product as a board spectrum disinfectant cleansing product.
Husky® 802 cleans, disinfects, and deodorizes hard surfaces, is a bloodborne pathogen compliant cleaner, and has a pleasant, long-lasting mint scent. It can be used to kill and stop the spread of countless infectious agents including:
|
|
- Avian Influenza A H5N1 Virus
- Enterococcus Faecalis Vancomycin (VRE)
|
|
- Human Coronavirus (COVID-19)
- Methicillin-Resistant Staphylococcus Aureus (MRSA)
- Staphylococcus Aureus (Staph Infection)
- Trichophyton Mentagrophytes (Athlete's Foot Fungus)
|
|
Because
Husky® 802 High Fragrance Detergent/Disinfectant is a more concentrated and comprehensive product compared to Lysol or Clorox cleaning wipes, we want you to take care when using the product. To prevent skin irritation you should always wear gloves when using it and avoid contact with any exposed skin. You should also avoid breathing in the fumes directly as this may cause airway irritation. Please reference the bottle instruction or the above
fact sheet for first aid instructions in case of an accident.
The directions for deep cleaning and disinfecting surfaces with Husky® 802 has been updated below, but please note that you should:
- Spray 6-8 inches from the surface
- Rub with a cleaning cloth or paper towels
- Wipe away excess liquid on the surface, but surface should air dry for at least ten (10) minutes
If you have any further questions about using Husky® 802 please contact your program director or area director at the office.
|
|
Stay safe and healthy,
Your L.I.F.E. HR Team
|
|
Updated
Deep Cleaning Procedures
Due to the addition of Husky® 802 to our supply we have, once again, updated our cleaning procedures for the heavily used surfaces at every residential and day program location. These procedures will be required to be carried out
every four (4) hours
, and
whenever
a surface is known to be contaminated.
To deep clean involves a two-step process–each surface must be cleaned and then disinfected. Steps are outlined below.
|
|
COMMONLY TOUCHED SURFACES
Must be cleaned and disinfected
- Fridge (exterior and handles)
|
|
Cleaning
refers to the removal of germs, dirt, and impurities from surfaces. Cleaning does not kill germs, but by removing them, it lowers their numbers and the risk of spreading infection. Surfaces should be cleaned of visible contaminants before disinfecting non-visible contaminants.
Always Wear Gloves: Use disposable gloves to clean items and surfaces and dispose of the gloves immediately after cleaning and disinfecting. Rewash your hands afterwards to prevent cross-contamination.
Hard, Non-porous Surfaces: Wash with warm water and liquid soap if the surface or item is hard and non-porous like a counter, sink, table, or toilet.
Soft, Porous Surfaces: Wipe clean before laundering if the surface or item is soft and porous like curtains, bed sheets, carpets, clothing, or rugs.
|
|
Disinfecting
refers to using chemicals to kill germs on surfaces. This process does not necessarily clean dirty surfaces or remove germs, but by killing germs on a surface after cleaning, it can further lower the risk of spreading infection.
Hard, Non-porous Surfaces: Disinfect with
Husky® 802 provided at the program for you if the surface or item is hard and non-porous like a counter, sink, table, or toilet. Allow the product to remain wet on the surface or item for
at least ten (10) minutes or until it air dries on its own.
Soft, Porous Surfaces: Avoid "hugging" laundry before washing to avoid self-contamination. Do not shake dirty laundry before washing to avoid spreading airborne viruses, dirt, or bacteria. Dirty laundry from an ill person can be washed with other laundry. Launder items according to the instructions on the label using the warmest water acceptable if it is soft and porous like curtains, bed sheets, carpets, clothing, or rugs. Dry the item completely before reusing.
|
|
Personal Protective Equipment (PPE)
In our ongoing efforts to assist staff and supported individuals in staying healthy, L.I.F.E. Inc. provides the following protective measures to prevent and control infection spread for employees and clients.
|
|
|
|
|
|
|
|
