Cycle Permissive: The system has four inputs which can be enabled/disabled. When enabled, the ram lock system must receive the input in order to unlock and allow the press handle to be pulled. The signal will be held high through the pressing operation and then be dropped when the ram is returned to TDC position. The input must be removed in order to permit the next cycle.
End of Stroke Verification: If selected and enabled, this option provides verification, within +/-0.001" (+/- 0.025mm), that the press has reached the end of stroke position. If the pull motion of the handle is reversed before the end of stroke is reached, the ram lock system locks, a fault is generated and the system must be reset in order to allow the handle to be returned to the up position.
Button Tie-Down: If selected and enabled, this option requires a touch capacitive button to be activated to release the ram for motion and button contact to be maintained to allow the ram to continue in a downward motion.
