BEECHCRAFT 36 SERIES AUTOPILOT, SKYVIEW v16 SOFTWARE, AND NEW PRODUCTS NOW FAA CERTIFIED
Dynon Certified announces that its autopilot is now FAA certified for all Beechcraft model 36, A36, and B36 Bonanzas. Dynon’s autopilot is available as an option for its already-certified SkyView HDX avionics system for select aircraft. When equipped, Dynon-equipped Bonanza pilots benefit from a full-featured three-axis autopilot system, including yaw damper, that is approach capable when paired with a compatible third-party IFR navigation device.

In addition to autopilot approval, Dynon brings a suite of new Installation Aids designed to simplify and speed installation of its SkyView HDX system. Shipments of Dynon Certified SkyView HDX displays resume immediately with newly-approved software version 16.0.

Dynon Certified products, including this autopilot approval, can be purchased and installed by any Dynon Authorized Installation Center. Additionally, pilots can opt to buy Dynon Certified equipment directly from Dynon and have it installed by a qualified installer.
Pricing for a two-axis autopilot system starts at a list price of $4,715 for the model 36 series Bonanza aircraft. This includes all required brackets, hardware, and servo harnesses. Yaw damper adds $815 with wire harness. Frequently-chosen options include the SkyView Autopilot Control Panel ($550), which provides dedicated autopilot controls for the pilot, and the Knob Control Panel ($250), which has dedicated knobs to adjust the values that pilots adjust the most when they fly under autopilot (altitude, heading/track, and altimeter setting).

Additional autopilot approvals are currently in progress for Cessna 182, Beechcraft Baron, and Mooney M20. Additional Bonanza models are expected to be added in the future as well.
SkyView Software V16 Now Available for Single-Engine Aircraft
The latest version of the SkyView system software for Dynon equipped type-certified aircraft is now available on the Dynon Certified website for download. Please note that this version of the software is NOT approved for twin-engine aircraft.
For a full list of features, additions, and fixes please visit the software updates page on our website.
NEW PRODUCTS
Mounting System Installation Aids
Dynon Certified is also excited to announce a suite of Mounting System products designed to reduce the time and effort installers spend mounting modules in the aircraft, with the goal of ultimately reducing the installed costs to the end customer. 

Until now, installers had to spend time deciding where to locate each module in an airplane, design custom brackets to mount each module, fabricating those custom brackets, and finally attach the brackets and modules to the airplane.

With Dynon’s new Mounting Systems, the installer can attach modules to brackets and trays that are specifically designed to receive them. They are also designed to integrate with Dynon SkyView HDX displays and other existing aircraft mounting points, such as the radio rack.
Universal Module Mounting Tray Kit for SV-HDX1100
The Universal Module Mounting Tray Kit for SV-HDX1100 provides the installer with a quick and simple method for mounting many of the commonly used SkyView electronic modules right behind the instrument panel. This puts the equipment close to the power distribution busses and the pitot-static plumbing, making the retrofit of a new glass panel into your airplane quick and easy. Maintenance access is enhanced, as every module is accessible through the display unit’s instrument panel opening after the display is removed.

This kit provides the Universal Module Mounting Tray along with the hardware necessary to install the tray permanently to the instrument panel. It can mount all of the required modules (SV-ADAHRS-200, SV-EMS-220, SV-ARINC-429, SV-BAT-320) except for the magnetometer, along with the SV-ADSB-472. The Universal Module Mounting Tray Kit’s list price is $95. To mount multiple SkyView Network Modules stacked as shown, installers can utilize two stacking kits, the EMS to ADAHRS/ARINC Module Stacking Kit and/or the ADAHRS to ARINC Module Stacking Kit, depending on configuration.

List Price: $95
COM/XPNDR Module Mounting Kit
This Kit simplifies the retrofit of the Dynon remote mounted COM and Transponder transceivers by locating these modules in a tray designed to fasten to the radio rack where previous rack-mounted COM and XPNDR transceivers were located. It may be installed either upright or inverted, with module access provided via the included access cover, or from underneath the instrument panel, depending upon the accessibility provided by surrounding equipment.

List price: $95
SV-HDX800 Module Mounting Tray
The Module Mounting Tray for SV-HDX800 provides the installer with a quick and simple method for mounting the SV-HDX800 Display unit, the SV-BAT-320 Back Up Battery, along with one of either the SV-COM-T8 COM Transceiver, or the SV-XPNDR-261 Transponder. Maintenance access is also quick and easy, as these modules are accessible through the display unit’s instrument panel opening after the display is removed.

List price: $75
EMS to ADAHRS/ARINC Module Stacking Kit
This Module Stacking Kit can be used to attach the SV-ADAHRS-200 or the SV-ARINC-429 module directly to the SV-EMS-220 module, simplifying the installers challenge of finding room for, as well as designing and fabricating mounting brackets for the SkyView electronic modules. By fastening the Module Stacking Plate to the top surface of the SV-EMS-220 module, the ARINC or ADAHRS module may then be attached, stacking the two modules together.

List price: $39
ADAHRS to ARINC Module Stacking Kit
The ADAHRS to ARINC Module Stacking Kit can be used to attach the SV-ARINC-429 directly to the SV-ADAHRS-200 module, simplifying the installers challenge of finding room for, as well as designing and fabricating mounting brackets for the SkyView electronic modules. By fastening the Module Stacking Plate to the top surface of the SV-ADAHRS-200 module, the SV-ARINC-429 module may then be attached, stacking the two modules together.

List price: $39
Dynon is already the leader in proving time-saving installation-oriented products. Our prefabricated SkyView Network Harnesses connect all SkyView Network modules in a plug and play fashion. Other components benefit from product-specific wiring harnesses that feature color-coded wires that match our installation manuals. With the introduction of these Mounting Systems, there’s no contest: SkyView HDX is the easiest to install integrated avionics system in GA.