PSG ON THE GO!
MAY/ JUNE 2018
Newsletter
PSG HAS UPDATED INFORMATION REGARDING PROP 65
 
It is important to note that the following information applies to PSG's family of Sizzle resins only.
 
As everyone in Plastics is probably aware by now, California has once again changed their requirements for labeling.  After reviewing the criteria, PSG has determined with the help of  knowledgeable authorities, that we can make this statement regarding our Sizzle (polystyrene) material:

PSG California Proposition 65 Statement   
 
Proposition 65 is a Safe Drinking Water and Toxic Enforcement Act of 1986 which is a California law that requires the state to create a list of substances that is believed to have toxicological
characteristics.
 
Merely because a product is a listed substance does not mean that a product is in violation of any product safety requirements or standards.

 In April of 2016, styrene was added to the California Prop 65 list.  However, let's not confuse
styrene with polystyrene (foam). Styrene is a precursor chemical structure used as a building block to manufacture many materials, such as polystyrene (foam).  In June 2011, the National Institute of Environmental Health Sciences (NIEHS) noted that styrene should not be confused with polystyrene (foam).  Styrene, which is a liquid, is used to make polystyrene (foam) into a solid plastic.  Finished plastics such as polystyrene (foam), ABS and SAN are not the same chemical as styrene and the Prop 65 listing does not apply to these polymers.

Polystyrene (foam) is a type of plastic that is used to make a variety of consumer finished goods.
Styrene and Polystyrene (foam) are different substances with different characteristics. FDA has
approved polystyrene (foam) as safe for use in contact with food, for more than 50 years.

PSG's Sizzle grades are an improved general purpose polystyrene and not to be confused or
categorized as styrene.  Therefore, the labels are not applicable with our Sizzle grades.
An XPSA article dated May 20, 2016, the deputy director of OEHHA made it clear that one
styrene-based plastic product that will not need a label under the California Proposition 65 ruling is polystyrene.  "We clearly stated this does not cover polystyrene," said Sam Delson. In 2011 and again in 2014 National Toxicology Program (NTP) reviewed, updated and reconfirmed the safety of polystyrene (foam) for use in contact with food.
 
John Bucher NTP Associate Director was quoted in the Associated Press in August 2011 stated: "The risks, in my estimation, from polystyrene (foam) are not very great." "It's not worth being
concerned about." A.)  Styrene - OEHHA proposed a no significant risk level (NSRL) of 27 micrograms per day B.)  Polystyrene (foam) - Exposure content: 6.6 micrograms per day - below safety limit.

The above information was provided through the following articles:
 

 

PSG SUMMER HOLIDAY SCHEDULE
PSG will be closed the following days/ dates:          
 
  Monday, May 28th - MEMORIAL DAY
  Wednesday, July 4th - INDEPENDENCE DAY
  Monday, September 3rd - LABOR DAY
   
Our goal is to provide outstanding service to our customers.  To better serve you, please follow these guidelines for turnaround times.
 
  Just-In-Time Service Orders- will process and ship in 3-5 business days. 
  Custom Blends- will process and ship in 5-7 business days.
Tailored Compounds- will process and ship in 4-6 weeks.
Specialty Concentrates - will process and ship in 3-4 weeks.
 
As always, we will do our best to meet your needs.  Please allow 24 hours from order receipt for PSG to process and send an order acknowledgment to the buyer's attention.  By following these lead times, you will give us the time we need to provide our best service to you.  Thank you in advance for your help!  
 
DO NOT FORGET!
 
PSG offers top notch technical services to our customers.  If you encounter any molding issues, please contact us!  We can help! 
MOLD/ TOOLING SERVICES
 
In addition, w e have several of the best tooling engineers in the business working with PSG to offer solutions for any tool issues you may encounter.  We have the capability to perform mold flow analyses, tooling recommendations, modifications and re-designs to new tools built for your specific needs!  If you need help with tooling, contact PSG. Our experts have 30+ years of experience in the industry and can provide low-cost options to solve your issue, whatever it may be.
 

Plastic Selection Group is, and continues to be the leading cutting edge source for water clear thermoplastic resins. With resin families that "fill the gap" between brittle clears and engineered clears, we are here to be your valuable partner in water clear resin selection and development. Please note the recent addition of our terpolymer hi performance, engineering grade Ketek™.
 
We offer cost saving performance driven alternatives which provide unit cost savings and will compete in your specific application.
  
Our mission at Plastic Selection Group, Inc. is to be a valuable and profitable partner in material selection and development for plastic manufacturers, component processors and end-users across the globe.
Our water clear lines offer superior performance and significant savings resulting in a higher profit margin.   
Visit our newest website:  www.ketekpolymer.com
www.go2psg.com   Google:  "Clear Thermoplastic Resins" - let us know what you find!!