ORTHOS: Securing Fresno's Water Future
"New plant has Fresno on its way to becoming one of the few drought-resilient cities in the Western U.S."
- Fresno Mayor Ashley Swearengin

April 4, 2018 - Orthos Liquid Systems, Inc.  (Orthos), the leading manufacturer of nozzle-based filter underdrain systems in water/wastewater treatment, is helping the City of Fresno CA to turn from its reliance on groundwater pumping through the commissioning of the new $159 million Southeast Surface Water Treatment Facility (SWTF). The biggest public works project in Fresno's history, the Southeast SWTF will enable the city to use many 10,000s of acre-feet of surface water yearly and take stress off rapidly-depleting underground water supplies.

Backwash Testing
The Southeast SWTF will initially treat 54 million gallons of water daily (MGD) from Millerton Lake and Pine Flat Reservoir when fully operational in late 2018. Within a few years, facility capacity will be increased to 80 MGD.
The Southeast SWTF is a cornerstone of "Recharge Fresno,"  a more than $400 million project to revamp the city's water system, that utilizes  the San Joaquin and Kings Rivers to ease dependence on underground water supplies, which have plunged more than 100 feet in recent years .

THE PROCESS
Th e Southeast SWTF treatment process includes pre-treatment flocculation and plate settling, ozonation, biologically active filtration, and chlorine disinfection.

Biologically active filtration uses granular activated carbon to remove organics, filterable solids, and micropollutants. Ozonation prior to filtration converts total organic carbon to biodegradable dissolved organic carbon, which microbes growing on the media may consume. Final disinfection using chlorine results in significantly less harmful byproducts due to the reduction of organics by the biologically active filters.

Air Scour Testing
Eight 
downflow  filters utilizing Orthos' nozzle-based Centurion™ monolithic underdrains each measure 60' x 15' (7200 ft2 total). Filtration media of 12" of ±0.6 mm sand and 48" of ±1.1 mm anthracite is placed directly on the Centurion media-retaining nozzles, eliminating the need for a gravel packing layer. Combined air-water media backwash methods effectively clean the media with lower flowrates and wash water volume, reducing capital expense and energy consumption.

WHY ORTHOS?
Carollo Engineers was responsible for planning, design, and construction management of the Southeast SWTF and worked closely with  Orthos Liquid Systems, Inc.,  regarding the biologically active filters. Nozzle-based monolithic filter underdrains were chosen for design by Carollo over block and triangular lateral types because of the following compelling benefits:

⇒ Structurally-superior concrete construction
⇒ Construction is less dependent on hard-to-control installation practices
⇒ Excellent filter and backwash distribution characteristics

LIFE CYCLE COST WINNER, EVERY TIME

Remember Orthos' HUGE life cycle cost benefits - At the end of the filter's life cycle (~25 years), in contrast to a complete plastic block or folded sheet metal underdrain overhaul, nozzles are simply replaced potentially saving $Millions.

"No need to replace the chandelier when all you must do is change out the light bulbs!"
20 YEARS OF EXCELLENCE

The countdown has begun!  In mere months, ORTHOS will celebrate our upcoming 2018 platinum anniversary of ZERO monolithic filter underdrain failures.
Orthos never underdrain orange
Traditionally, the 20-year anniversary gift is breakable china , but that would be like the multitude of plastic block or folded sheet metal underdrain failures --not ORTHOS!  We're going platinum!
ABOUT ORTHOS LIQUID SYSTEMS, INC.
Providing filtration solutions since 1978, Orthos Liquid Systems, Inc., is the leading manufacturer of nozzle-based filter systems and nozzle products in water/wastewater treatment. With thousands of North American installations in the municipal and industrial markets and millions of nozzles sold, Orthos delivers unparalleled quality and system longevity. Orthos is also the North American master licensee for Schlick® atomizing nozzles for pharmaceutical and other precision application industries. For more information, visit www.orthosnozzles.com or call 843-987-7200.
Sincerely,


Stuart Humphries
Orthos Liquid Systems, Inc.
770-880-0590
Orthos Liquid Systems, Inc.
P.O. Box 1970
Bluffton, SC 29910
© 2018 Orthos Liquid Systems, Inc. All Rights Reserved.

Newsletter developed by Solutions for Growth