Dr. Shrink's
Zipper Access Doors are taped on the finished cover to allow access into a shrink wrapped object without compromising the durability of the cover.
TRICK - To install our Zipper Access Doors, just follow these simple steps:
1.) You must tape all 4 sides of the door to the shrink wrap cover. Press and seal the tape to the cover. *It's important to use
Heat Shrink Tape for the best adhesion.
2.) Make sure to rub out all the air bubbles and to use the Dr. Shrink Film Knife so your cuts on the end of the tape are clean.
3.) Once the door is taped on, unzip the door and cut out the hole to access the inside of your object.
|
