Most Common Forklift Violations:
Training and Inspections
The most commonly cited
powered industrial truck
regulations relate to operator
training
and conducting
inspections
for safety issues. If an operator causes an accident, OSHA doesn’t give the operator a ticket; the agency cites the employer for failing to properly train the operator. Similarly, if an operator failed to remove a defective forklift from service, the employer (not the operator) gets the citation.
Make sure operators not only conduct pre-shift inspections, but watch for problems during their shift. Operators must remove a forklift from service for repairs when needed, and that includes recognizing equipment failures that may occur during the shift.
Accidents from violations
Accidents involving forklifts can cause serious injuries, resulting in the hospitalization or even the death of an employee. Hospitalizations must be reported to OSHA, so the employer may face an inspection following the report. Serious injuries may occur when:
- The operator drives off a dock or other edge and tips over.
- The operator elevates another worker on the tines without a proper cage.
- The operator strikes a worker with the forklift, or strikes an object that hits a worker.
Other violations that occur all too often (and could result in serious injuries) may include:
- Raising or lowering a load while moving, like raising the tines while approaching a rack.
- Driving too fast for conditions such as blind spots or pedestrian traffic.
- Traveling with a load that is unstable or too heavy.
- Failing to chock or block the wheels of a semi-trailer (required even for inclined docks)
(Source: EHS Insider, March 2020)
