|
Using Default Calibration Labels
When calibrating gages, printing labels is a big part of your job. Instead of having to select a label each time, you can set your most commonly used label size as the primary default. This can save a lot of time when the majority of your gages use the same label size, and for those few that need a different size, you can set those gages to have their own default label size.
In GAGEtrak 7, navigate to the
Setup -> Settings -> Cal. Options tab and in the lower right corner, choose your
Default Calibration Label size. This is the default label which will be used for every gage unless specified otherwise in the gage record. Now every time you enter a new calibration, the default label will already be selected.
For any gages that require a label size other than the primary default, navigate to the
Gages -> Schedule tab and then select the
Default Calibration Label for that particular gage. This selection will override the primary default label chosen in
Settings.
When using default labels, just make sure your printer is loaded with the correct label size and then calibrate and print!
We encourage you to explore the additional capabilities of your GAGEtrak software and as always, keep an eye out for future Tech Tips.
|
