LAKESIDE CONSTRUCTION FASTENERS QE2 2018 UPDATE


Kyle Lane

Lakeside Construction Fasteners has established a reputation for providing the finest quality fastener  and foam products in the industry. I want to take this time and thank you for choosing LCF and giving  us the privilege of helping you to achieve your goals. Your trust in the LCF brand allows us to deliver a  product and a level of service that continues to exceed expectations.

Your input drives our innovation and commitment to the Metal Building Industry. Lakeside Construction  Fasteners was awarded Best New Product at the International Roofing Expo this year in New Orleans for  our Cor10 Wood-X. This is another example of our continued commitment to innovate new products.

We've also added our #14 Securtek self-drillers with 3/8 head to our line of fasteners this year! In  addition to our innovation of these fasteners, we also expanded our foam and pipe flashing product  offerings. Check out all these new products on our website at www.lakeside-fasteners.com.

  From the entire family at Lakeside Construction Fasteners, we want to say "Thank You" for YOUR  BUSINESS! We will continue to innovate and "Provide Alternative Foam and Fastener Solutions" that  exceeds your expectations.


The new high-strength COR-10 WOOD-X (#10 x 1"- 3") is engineered to secure Corten metal panels into hardwood substrates, offers a sealed protective barrier, and pre-weathered for exact Corten metal panel color match. No more waiting for your fasteners to be painted or weathered to match Corten metal panels!! The LCF COR-10 WOOD-X can be used with battery operated screw guns including Impact Screw Guns!

  
T17 MASTERGRIP  XL offers contractors and building roll formers a solution for many high wind environments. With the deep major thread design the T17 MASTERGRIP  XL provided by Lakeside Construction Fasteners allows the fastener to be embedded in all wood substrates for maximum pull-out! T17 MASTERGRIP  XL will secure the metal panel to the wood structure to help prevent panel pullover and shear in the most extreme high wind conditions!

 

LCF listened, and now we're delivering on the new SECURTEK self-drilling fastener for 2018-2019! Through innovation LCF engineered a self-drilling fastener for Pre-Engineered Metal-to-Metal Buildings that will give builders higher torque, shear, and pull-over attributes securing metal panels to the metal building frame. Designed To Last Severe Weather Conditions!


 

The FlatSeal  range is tailored to flash around roof penetrations on flat and low pitch roofs with a single ply or bitumen covering. The FlatSeal  is installed in one easy step without the requirement for special tools or fittings.

 

AST/ASH is a self-adhering tape seal made from resilient, open-cell polyurethane foam impregnated with a water-based acrylic-modified asphalt emulsion and then compressed to a sealing density level appropriate to the application. Typically, higher compression levels are required for water-tightness  in water run-off applications; lower compression can be used, for example, for snow seals at roof ridges. AST/ASH replaces and outperforms liquid and butyl-tape sealants as well as closed-cell and unimpregnated open-cell foam closures.
SD ProTek™ self-drilling fastener is developed for metal-to-metal building applications. The innovative SD ProTek™ with a larger head diameter limits wind uplift, and the concealed EPDM tubular washer system allows for a weather-tite seal. The engineered flat surface area on the SD ProTek™ also provides positive nutsetter engagement, preventing wobble during fastener install. Deep root cut threads give the SD ProTek™ Maximum Holding Power when installed into metal building panels!

Providing Alternative Fastener and Foam Solutions!™

For more information about Lakeside Construction Fasteners please visit our website at www.lakeside-fasteners.com!