 |
E-Seal Waterproof Connectors
E-seal uses a Proprietary epoxy sealing process through which seals the entire back of the connector rather than at individual pins. This provides for complete sealing with an impeccably smooth finish and guarantees no water ingress as fully tested to IP67 standards. Full range of D-subs from DB 9 right through to a maximum of 78 positions available. Standard and high density footprints are readily available in vertical or right angle orientations. Plating options vary from gold flash to 30u" of gold and include a wide variety of mounting options. Combo Power D-subs which can carry up to 20 amps on the Power pins. USB Type A and B wire to wire use quarter turn twist and lock over mold and O-ring for the perfect seal every time. USB Micro B saves valuable board space and provides maximum cable retention. Fully epoxy sealed at rear plus a custom O-Ring reliably seals the shell to panel. IP67 Waterproof HDMI cable connectors with quarter turn twist and lock over mold and O-ring provide for a rugged waterproof connection in all outdoor video applications. Seal up your design with E-seal your best waterproof solution...
|
SERIES 627/628/629/630
WATERPROOF D-SUB
Plug and Receptacle , Straight or
Right Angle PCB Mount
.109"(2.77mm) Contact Spacing x .112"(2.82mm) Row Spacing
Plug and Receptacle in 9, 15, or 25 Contact Pin Sizes
Pin Contact Mating Design with P.C. Tail Termination in Right Angle,
Straight or Solder Cup Termination
Plug Shell Indents Provide Grounding and Additional Mating Retention
Grounding Feature include Two Prong Boardlock for Exceptional
Retention to P.C. Board
Mounting Options for Panel Mount or Connector Mating include
Threaded Inserts or Threaded Standoffs
D-Shaped Connector Mating Outline provides Polarization
Degree of Protection: IP67 as per IEC60529
|
|
|
|
SERIES 600W
WATERPROOF D-SUB HIGH DENSITY
Waterproof High Density D-Subs are available in 15, 26 and 44 pin sizes Contact Terminations are available in:
90° Right Angle PCB Tail
180° Straight or Vertical PCB Tail Solder Cup Tail
Material: PBT Thermoplastic with 30% Glass Filled, UL 94V-0 Rated, Black color
Watertight Frame: PBT Thermoplastic with 30% Glass Filled, UL 94V-0 Rated, Black Color
Shell: Steel, Nickel Plated O-Ring: Silicone
Epoxy Sealant: Epoxy
Contact Material: Copper Alloy
SPECIFICATIONS:
Contact Current Rating:
3.0 A
Contact Resistance: 10 milliohm maximum
Dielectric Withstanding Voltage: 1000V AC for 1 Minute Insulation Resistance: 5000 Megohms minimum Temperature Rating: -25°C ~ +85°C
Degree of Protection: IP67 as per IEC60529
|
|
|
SERIES 627/628 (7W)
WATERPROOF D-SUB
Plug and Receptacle , 7W Power Combination
.109"(2.77mm) Contact Spacing x .112"(2.82mm) Row Spacing
Plug and Receptacle in 5 Contact Pin Sizes and 2 Power Contact Pin
Sizes (7W)
Pin Contact Mating Design with P.C. Tail Termination in Right Angle,
Straight or Solder Cup Termination
Plug Shell Indents Provide Grounding and Additional Mating
Retention
Grounding Feature include Two Prong Boardlock for Exceptional
Retention to P.C. Board
Mounting Options for Panel Mount or Connector Mating include
Threaded Inserts or Threaded Standoffs
D-Shaped Connector Mating Outline provides Polarization
Degree of Protection: IP67 as per IEC60529
|
|
|
SERIES 690W
WATERPROOF USB & HDMI
Plug and Socket , USB and HDMI Connectors
E-SEAL Waterproof Connectors: Standard USB TypeA, Micro USB, Mini USB Type B and HDMI Type A
Compatible with all Windows versions
1.2Mbps or 480Mbps communication speed
Complies with USB1.0 (USB2.0 upon request)
Compatible with asynchronous and isochronous data transfer
methods
Silicone rubber seals
Secure latching system for safe mating under severe vibration or
shock conditions
Degree of Protection: IP67 as per IEC60529
|
|
|
|
SERIES 560
Wire to Wire / Wire to Board 2.5mm Pitch
2.5mm Pitch, Rated Current: 3A max
Fully Waterproof with Double Latch Solution
Available in Wire-to-Wire and Wire-to-Board Options
Seals Preassembled into Housing; No
External Sealing
Required available in 2, 3, or 5 Positions
True Crimp and Poke Solution
Waterproofing Cap available to cover holes of wire seal
Internal Polarization to Prevent Mismating
Available with wire already installed
Waterproof Grade IP67 Certified
|
|
|
|
SERIES 566
Wire to Wire / Wire to Board 2.0mm Pitch
2.0mm Pitch, Rated Current: 2A max
Fully Waterproof Solution available in 2, 3, 4, or 6 Positions (2 and 3 Positions Only for Wire to Board)
Available in Wire-to-Wire and Wire-to-Board Options
Seals preassembled into housing; no external sealing required
True Crimp and Poke Solution
Waterproofing cap available to cover holes of wire seal
Available with wire already installed
Waterproof Grade IP67 Certified
|
|
|
|
SERIES 567
Wire to Wire / Splash Proof 5.0x5.9mm Pitch
5.0mm x 5.9mm Pitch, Rated Current: 8A max
Splashproof Solution available in 1, 2, 3, 4, 6, or 9 positions
Available in Wire-to-Wire Options
True Crimp and Poke Solution with various sized wire seals available
Available with wire already installed
Splash Proof Grade IP52 (JIS C0920) Certified
|
|
|
|
SERIES 568
Wire to Wire /
Splash Proof
Rated Current: 12A max
Splashproof Solution for Single Position
Available in Wire-to-Wire Option
True Crimp and Poke Solution with various sized wire seals available
Available with wire already installed
Splash Proof Grade IP52 (JIS C0920) Certified
|
|
|
|
SERIES 567
Wire to Wire / Splash Proof 5.0x5.9mm Pitch
5.8mm Pitch, Rated Current: 10A max
Fully Waterproof with Double Latch Solution
Available in Wire-to-Wire and Wire-to-Board Options
Seals preassembled into housing; no external sealing required available in 1, 2, or 3 Positions
True Crimp and Poke Solution
Internal Polarization to Prevent Mismating
Available with wire already installed
Wide range of wire sizes available
Waterproof Grade IP67 Certified
|
|
|
EDAC is a Canadian success story. Established in 1966, EDAC became a world leader in the Card Edge and Rack & Panel industry. Many of our legacy designs are still in use today though over the years, we've expanded our line to include one of the widest ranges of interconnect solutions in the world.
Headquartered in Markham, Ontario, EDAC now has design and customer service centers worldwide, manufacturing facilities in China, and customer logistics centers in Canada, United States, UK, Taiwan and Hong Kong.
The connector has evolved over the last 45 years and EDAC has been one of the leaders in the industry's evolution. EDAC offers a wide range of products including Card Edge, Rack and Panel, RJ45 & Telecom Jacks, USB & Firewire, Waterproof, PLCC Sockets, D-Sub, Pin Headers and custom cable assemblies.
EDAC also has the ability to deliver custom connectors ranging from minor product variations to full custom solutions from concept to finished goods in less than 12 weeks and prototypes usually under 4 weeks.
We can also support low volume orders for many product variations which many of our competitors can not. We do this because our commitment is not only to your production needs but all your prototyping needs as well.
We have an extensive Global customer support system that includes dedicated inside sales service, highly trained field support, and a global distributor and representative network that can co-ordinate the timely delivery of EDAC products to any factory in any country and proactively resolve any issues in a timely manner.
At EDAC, we are proud of our global Engineering Team. Based in North America, China and the UK, they travel the world to meet team's specialty is resolving electronic connector issues by designing cost-effective interconnect solutions that exceed the expectations of our customers.
At EDAC we will continue to use our manufacturing expertise coupled with the extraordinary talent and experience within our organization to offer the best interconnect products on the market.
Our goal is to stay on the forefront of connector technology while continuing to support our valued customers with legacy products and competitive crosses to obsolete and discontinued products.
|
|
|
About Us
SMD Inc. Is a Provider Of Electronics And Electrical Components, Services And Logistic Solutions For Commercial,Industrial And Military Manufacturers.We offer a wide variety of products from an authorized supplier base. We provide technical and sales expertise on all product lines and commodities. SMD Inc. is a specialized distributor with a focused product offering. This has allowed us to be experts in our supplier's product offerings. SMD Inc. offers supply-chain and logistics solutions to a variety of market segments including energy, medical, industrial controls, defense, automotive and transportation services.
|
|
Contact Us
|
Irvine, CA 92618
Phone: 949-470-7700
|
Los Angeles Regional Office
Torrance, CA 90502
Phone: 310-379-3642
|
San Diego Regional Office
San Diego, CA
Phone: 619-851-9209
|
Northeast Regional Office
Salem, NH 03079
Phone: 603-681-0320
|
|
Southeast Regional Office
Atlanta, GA
Phone: 770-503-5844
|
Southwest Regional Office
El Paso, TX 79906
Phone: 949-470-7700
|
Midwest Regional Office
Chicago, IL
Phone: 847-293-1881
|
Florida Regional Office
Deerfield Beach, FL
Phone: 954-428-8840
|
|
Sunnyvale Regional office
Sunnyvale, CA 94086
Phone: 408-988-3751
|
Arizona Regional Office
Mesa, AZ 85210
|
|
|
|
|
|
|
|
|
