D-Stud from Duro Dyne

D-Stud ^™ attaches conduit to ductwork.

The D-Stud is a Dyn-O-Loc with the threaded stud pre-attached. This assembly allows the installer to easily locate the pre-drilled hole.

We recommend using a D-Stud on one end of conduit and a standard Dyn-O-Loc on the other for easy insertion and alignment of conduit in the duct work. While the D-Stud anchors the Conduit to the ductwork, the installer can easily add the washer and bolt to the Dyn-O-Loc on the other side from the outside of the ductwork. This results in a large labor saving due to the reduced personnel needed for the reinforcing of the ductwork.

Visit our webpage to learn more about the D-Stud

and other related products!

Features:

Labor Savings!
Properly installed D-Studs are pull tested to over 1300 lbs.
Anchors conduit in place during installation.
Works with both insulated and non-insulated duct work.
Allows the installer to easily locate the pre-drilled hole.

D-Studs work great with Dyn-O-Locs® !

Duro Dyne offers D-Stud™ Insertion Tools in both automated Air Tools or manual.

Also available: Dual Dyn-O-Claw

Ordering Information:

21097 DOMRL12 1/2” Dyn-O-Loc*
21098 DOMRL34 3/4” Dyn-O-Loc*
21208 DOMRL12-100 1/2” Dyn-O-Loc
21209 DOMRL34-100 3/4” Dyn-O-Loc
13021 DS12K-250 1/2” Dyn-O-Loc D-Stud™ Kit
13023 DS34K-250 3/4” Dyn-O-Loc D-Stud™ Kit
13025 DS12-250 1/2” Dyn-O-Loc D-Stud™ Only
13027 DS34-250 3/4” Dyn-O-Loc D-Stud™ Only
13029 DSGW-250 Dyn-O-Loc D-Stud™ Gasket Washer
13031 DSFN-250 Dyn-O-Loc D-Stud™ Flange Nut

*Dyn-O-Locs included with Rod Loc Insertion Machine.

21298 DOMOC1234 Dual Dyn-O-Claw 1/2in & 3/4in
13113 DAG Duro Air Gun for Dyn-O-Loc & Hollow Turning Vane
13118 DST D-Stud Insertion Tool for DAG Air Gun
13119 DLT Dynoloc Insertion Tool for DAG Air Gun

Conduit from Duro Dyne is also available!

21099 MC1210 1/2in Thin Wall Conduit - 10ft Lengths
21100 MC3410 3/4in Thin Wall Conduit - 10ft Lengths
13051 MC0110 1in Thin Wall Conduit - 10ft Lengths

For more information on the D-Stud and related products, click the images below for the Literature Sheet and Submittal!