Signal Microwave's primary mission is creating solutions for the Signal Integrity/High Speed Digital market.

The company is moving beyond the technology developed by traditional microwave connector manufacturers to create innovative new connector and PC board products.

All products are fabricated and assembled in the USA and France using military grade materials and processes.
Some examples of products we supply from Signal Microwave:
ELF40-xx Edge Launch Connectors, 2.92mm Interface

2.92 mm Edge Launch Connectors are designed to optimize connector to board transitions. The 2.92mm interface is mode free through 40 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition. No soldering is required so solder is not a factor in interfering with the transmission line.
ELF67-xx Edge Launch Connectors, 1.85mm Interface

These 1.85mm Edge Launch Connectors are designed to optimize connector to board transitions. The 1.85mm interface is mode free through 70 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition. No soldering is required so solder is not a factor in interfering in the transmission line.
ELF110-xx Edge Launch Connectors, 1.00mm Interface

The 1.00mm Edge Launch Connectors are designed to optimize connector to board transitions. The 1.00mm interface is mode free through 110 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition. No soldering is required so solder is not a factor in interfering in the transmission line.
VLF40-002 Vertical Launch Connectors, 2.92mm Interface

Connectors that can be mounted anywhere on the board, not just the edge. Utilizes a vertical launch transition to the board with a screw-on mounting compression fit. The interface is 2.92mm and operates mode free through 40 GHz. The compression fit does not require soldering for consistent Signal Integrity performance. Application support is available including 3D models of the connector that can be used in 3D electro-magnetic solvers to design optimized board transitions.
FRF40-00x Vertical Launch Connectors, 2.92mm Interface

Highest performance Field Replaceable Connectors on the market. These field replaceable connectors have a 2.92mm interface and a rear socket to accept a 12 mil (.012inch) pin. Standard 2 and 4 hole flange sizes available. The 2.92mm interface operates mode free through 40 GHz.
Field replaceable connectors are designed to be mounted on packaged devices to complete a 50 ohm transmission line into and out of the package. 
VNA Broadband Verification Boards

Signal Microwave and GigaProbes have developed a line of 40 and 70 GHz test boards. Created as a demonstration tool, they are also used for validating VNA calibration and operation. This helps ensure accurate measurements to 40Ghz or 70Ghz and they are compatible with all VNA manufactures. They have three connector to connector traces: -50ohm -100ohm -Beatty standard. Other versions include an 85 ohm line, 1mm pitch probe lines, and LRL calibration lines.

Contact Us for more information

Did you know we supply components from over 40 different manufacturers?