|
Dear Rapido Customer,
HO scale GMD-1 Road Switcher Rapido Trains Inc. and MLW are delighted to announce the HO scale GMD-1 Locomotive. This unique locomotive was built between 1958 and 1960 by General Motors of London. The GMD-1 is an extended 1200 HP roadswitcher, equally at home on the branchline, on the mainline, and in the yard. The 1000-series GMD-1 features A-1-A trucks to distribute its 120 tons over six axles and allow travel on light rail branches in the Prairies. The 1900-series GMD-1 features 2-axle Flexicoil trucks and a steam generator for passenger mainline and switching duties. We are doing both in the first run.
Even though the GMD-1 was exclusively built for Canadian National and Northern Alberta Railways, it quickly became a Canadian railway icon with a devoted following. Simply put, there is nothing quite like the GMD-1, and it is still in service today both for CN and for numerous shortlines in the US and Canada. It is even in service in Cuba! It will be available as an undecorated semi-kit if you wish to add one of these unique beasties to your freelanced railroad.
Product Features
What is MLW? The GMD-1 Locomotive is being produced for MLW, an investment group with interest in Canadian prototype model railroading. Unlike other exclusive runs we have done in the past, Rapido is handling the distribution of this project. That means the GMD-1 will be available through all regular Rapido dealers as well as directly from us. What's in a name? We have original GMD manuals for the GMD-1, as well as original blueprints and original CN equipment diagrams. Consistently across all of our original documentation, this locomotive is referred to as the GMD-1 with a hyphen between D and 1. It is commonly referred to as the GMD1 (no hyphen), which is incorrect. Unlike the FP9A locomotive, which was all over the map in terms of nomenclature, ALL of our primary sources indicate that the correct name for our new locomotive is GMD-1. Please rewire your brains accordingly, and please protest most strongly to the Bytown Railway Society, publishers of the Canadian Trackside Guide. So far my appeals for them to rid themselves of that awful "GMD1" have fallen on deaf ears. There truly are no greater causes to fight for than to get people to write "GMD-1" correctly. I think I hear Captain Kirk telling me to get a life... What about the striped units? CN rebuilt its GMD-1s into the 1600 series (3-axle trucks) starting in 1988 and into the 1400 series (2-axle trucks) starting in 1989. These were decorated in the gorgeous sergeant stripe scheme and the 1400s are still in use today across Canada. Provided that the 1000s and 1900s are successful, we do intend to tool the 1400 and 1600 variations for release in 2015. If you can't wait that long, the 1400s can easily be made from an 1100-series GMD-1 with the addition of anticlimbers and battery boxes. To that end, we will produce undecorated 1100-series GMD-1 locomotives with our first run. Decorated 1100s will come later. Despite that explanation, I am willing to wager that I get at least ten emails from people asking "where are the striped units" because they just skimmed over the newsletter and didn't see the above paragraph. I'll write back to them and tell them to read the newsletter again. For those of you reading this for a second time, hi there! Nice to see you again! Relax and have a Flaky.
Other Useful Information The MSRP for the GMD-1 Locomotive is $225 (DC) or $325 (DCC and Sound). The absolute latest date you can order your GMD-1 models is 4 October 2013. Production will begin in October, with delivery in 2014. Click here for paint scheme illustrations, road numbers and product numbers. As is the case with most of our products, these are being made entirely to order. That means if we have advance orders for 1007 pieces, we make 1007 pieces. We don't carry inventory. So please ensure you get your order in before the deadline. Also please note that Rapido does not take deposits for the GMD-1 from its dealers or direct customers. Full information can be found here. I will be taking improved samples on a Western Canada tour in August, with some select eastern cities in July and September. More info on the tour, as well as additional prototype information, will be coming in the next newsletter. Dan, Matt and I went in search of the GMD-1 in late 2011 to record the sounds for this Canadian icon. Click here or on the image below to watch the video. But only do so if you have time to spare, as it's 15 minutes long! What about N scale?
The Continuing Headache of CMT's Insolvency The following applies to those of you who were affected by CMT's apparent insolvency last year. Due to a variety of issues which we have been unable to resolve, Rapido is unable to continue to do business with True Line Trains or 2236675 Ontario Limited o/a Hobbycraft Canada. If you have ordered a Rapido product through True Line Trains that was previously ordered through CMT, please contact us. We sympathize with all of you who have been caught up in the CMT fiasco and we will do all we can to minimize any further inconvenience to you. However, we are caught between a rock and a hard place as we cannot guarantee that we will have available stock to fill all of the CMT orders. We have very limited availability on future Rapido items (with the exception of the LRC) and we are sold out of everything that has already been delivered. We will do our best. There are two things to bear in mind: 1. Apart from The Canadian, we have not taken any deposits from any of our dealers for standard Rapido products. 2. We have no way of knowing exactly how many orders CMT took for future Rapido products. If you are affected by this, please email us and attach any documentation that you can. As we expect to be inundated with emails, note that it may take a few days to get back to you. We will respond to emails in the order that they are received and as quickly as possible, and we will do our absolute best to get you the products you ordered. Also please note that we can only respond to CMT-related emails during business hours as we need to have access to our accounting database. Emails are preferable to phone calls for your initial contact as that way we both have a record of the date and time of the correspondence. Please ensure that you put "CMT" in the email subject line.
Kids and Trains (again!) Two model railroader dad dreams came true recently. Firstly, my daughter, Dalya, asked for a "train birthday party" for her 6th birthday earlier this month. She wanted everything to be about trains. In the photo above, helper Adina Saban is directing one of the kiddies to try and pin the CP caboose onto the CP freight train! This was a very easy activity to do - the poster cost less than $10 to print at Staples and I printed the caboose using an inkjet printer.
Sidura baked a 9x12 cake which I cut into a close approximation of a VIA logo, and we took the kids on a "train ride" in the basement. But the girls' favourite part was decorating their VIA shirts! You can order these "Kids Luv 2 Colour" VIA shirts from VIA's souvenir shop here. They are a great activity for a birthday party, a road trip or a rainy day. For the last few minutes we showed them The Big Train Trip, which is a wonderful video all about riding The Canadian from Toronto to Vancouver. This can also be ordered from VIA by clicking here.
The other model railroader dad dream to come true was that my son asked if we could build a layout in his room. We spent several days here and there over the last few months working on his layout, and we finally finished it last week. It's a shelf layout designed for him to set up his Bachmann E-Z Track on top, and he is having a lot of fun operating it with his 100% reliable NCE Power Cab (highly recommended).
The last piece of the puzzle was to install the removable bridge spanning Boaz's bed, which is made from aluminum box channel and plywood and was very easy to do. Building the layout with Boaz taught me a lot about model railroading in practice rather than from the armchair, and changed a lot of my perceptions. You can read all about the layout, how it was constructed, and how it changed my perspective on model railroading in my recent Rapido Blog entry, here. I'm very fortunate that trains are my job, so my kids are exposed to trains and the hobby of model railroading all the time. I have said many times before that I don't think we should worry too much about getting kids into the hobby. There is a reason why campaigns to get people into model railroading focus on nostalgia - our hobby's largest demographic has always been guys in their 50s and 60s. At the risk of sounding like a broken record, the most important thing is to expose kids to trains and train travel. We have family in Winnipeg and whenever we go for more than a couple of days we take the train. This summer, Boaz and Dalya will be riding The Canadian for the 9th and 8th times, respectively (not bad for two kids 8 and under!). By using VIA Preference points, it is cheaper to take a sleeper to Winnipeg than it is to fly. Amtrak has Guest Rewards which is also a very generous reward program. If there are no intercity trains where you live, get them onto the commuter trains. If there are no trains at all where you live, make it a part of your vacation plans. Last time I posted a blog encouraging people to take the train, it really offended some people. I have never understood model railroaders who never ride the train, but model railroaders who get pissed off when you try to encourage them to take the train are from another planet as far as I am concerned. Go collect ladybugs or take up underwater basket weaving instead. The old expression "use it or lose it" applies to rail service more than just about anything else.
Earlier this month VIA announced another crazy seat sale so I booked the kids and me on a trip to London on Mother's Day, thus giving Sidura a break. It was a wonderful afternoon out and the kids had a blast, even though Daddy was very, very tired afterwards! Isaac didn't stop wandering up and down the aisles and making friends with all the pretty girls - I wish I had known to have a baby with me when I was trying to pick up girls 20 years ago! To that grumpy middle-aged lady in 6B, sorry about your iPod, eh? If we want to keep model railroading strong in the long term, the only answer is to ensure your kids and grandkids get to ride trains like you did. In my case, my kids ride the train a LOT MORE than I did. I only got to ride VIA and GO a couple of times a year and my first trip on a sleeper wasn't until I was 18. They've got a full-size train in their basement. 'Nuff said. Thanks to all of you for continuing to read these newsletters and for your support of Rapido. We quite literally wouldn't exist without you. As you can see, now that The Canadian has been delivered the new product announcements are coming fast and furious. Next month we'll be relaunching our new N scale passenger cars and launching a completely new product good for all eras. There are lots of great things on the horizon from Rapido and we hope to have you along for the ride! All the best, Jason Jason Shron President Rapido Trains Inc. P.S. have a look at the decals I just got put on my car. Yes, I'm obsessed!
ABOUT RAPIDO NEWS Rapido News is ©2013 Rapido Trains Inc. You have received this email because you signed up for the newsletter on our web page or you have inquired about our products or because we know you and we think you will want to read it. How's that for a disclaimer? To unsubscribe, follow the link below. Rapido Trains Inc. supports our hobby shops - please buy our products from your local dealer. Rapido Trains Inc. is a registered trademark. |