Busellato 5-Axis CNC & Leadermac Moulders

May 3 & 4 Spring Open House - Click to register

All Machinery is Under Power
                                                           
Busellato T5  5-Axis CNC Machine Center

Including the legendary Genesis Evolution 5-Axis programming software.
 
- 4.75' x 10' and 4.75' x 17.25' configurations
- MP18 boring head: 12 Vert. and 6 Horizontal 
- 2 work areas in X - Front and rear reference
  stops
- 12 position rotary tool changer and 12
   position tool rack
- 15hp Electrospindle HSK-F63 24000 rpm
- Chip conveyor for chip & block removal 
- Network and USB connection
- Electospindle and tool changer are both "aggregate-ready"
- Vacuum pod standard with electronic digital display of rail & pods locations for quick set-up
- Pod Clamping for narrow parts 
 
Typical applications include;Store Fixtures,Commercial Doors,Display Fixtures, 
   Architectural Millwork, Furniture parts, and numerous other Specialty products.  
Busellato Easy Jet 5.12C CNC Machine Center  
  • 5' x 12 working area
  • 13HP Electrospindle HSK-63; 24,000 RPM
  • Boring head with 12 Vertical Spindles
  • 10HP Becker dry-vane vacuum pump - Optional second pump
  • 14 position tool changer
  • Automatic tool length measuring
  • 4-way directional air for effective dust collection
  • Network and USB connection
  • Vacuum grid table for use with vacuum cups
  • Wave Nested Based & Parts programming software
  • Automatic Off-load and table dust collection
  • Off-load table

Flexa 207 Super
Flexa 207 Super Production Edge Bander  
  • MEGA 300 Touch Screen Controller
  • Electronic Pressure Beam
  • GP-800 Gluing unit, auto-edge loading and w/ 3-4 pressure roller system
  • 12/18 m/min feed speed
  • Vertical end trim on dedicated THK guides with automatic blade inclination 0-15 deg.
  • RI/S Bevel Trimming Unit with automatic positioning
  • Round K, 2 motor Corner Rounding Unit with 2-pneumatic positioning
  • Edge Scraping Unit
  • Glue Scraping Unit
  • Buff/ Brushing Unit
  • Hot Air Blower
Leadermac Platinum 6-Head Moulder  

  • 9" Width x 6" Thickness Capacity
  • 6 Heads
  • Feed Speeds to 100FPM(30m/min)
  • Full Sound & Safety Enclosure
  • One-piece, Cast Iron Machine Frame
  • Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns(at each end) and includes Motorized vertical adjustment of feed beam
  • Feed System is Full HD Cardan Shaft with very heavy gearboxes and universals
  • More Powered Top & full Width Bottom Rolls then most of our competition
  • Pneumatic Pressure of the Top Feed Rolls Separate Pressure controls for top Infeed & Out-feed Rolls
  • Pneumatic Pressure - easily adjusted to Side head Holdover Rolls as well as the Top Head Chip-breaker(s)
  • Precision Spindle Assemblies each including Abec 7 Precision Bearings for highest tolerances
  • Spindles Speeds are 8,000 RPM
  • Each spindle is driven by an individual motor for powerful machining and easy control
  • Hard-Chrome Plating on all Table Surfaces, Chip breakers, Pressure Plates and Main Guide for maximum wear resistance
  • Dual Digital Counters on Near Side Head & To Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip-breakers & Pressure Plate(s)
  • Automatic Table Lube System
  • Central Grease Lubrication System - lubrication points located from front of machine
  • Electrics to UL/CSA Standards and are 230/460

Leadermac Platinum 623
Cantek JF-330 Profile Grinder
  • Axial Constant setup and template position
  • VFD Variable Freq. to Wheel
  • Quick Change Wheel Adapter
  • Quick Side Angle positive positions
  • 90 degree positive grinding wheel lock
  • Arbor of choice
  • 6 spacers on arbor
  • Over the wheel precision dresser assembly
  • Vari-speed grinding wheel - 1500 to 4200 RPM with V.F.D.
  • Quick change removable Grinding Wheel Adapter - 140mm
  • Schneeberger Lineal bearing table movement
  • 6-positon Stylus Turret for quick change - with 6 stylus
  • 5° / 10° / 15° side clearance - quick setting
  • Straight and radial diamond Dresser - mounted above wheel
  • 3 coolant nozzles - above and below the knife with pump/tak & cleaning hose with nozzle
  • Stainless Steel Splash Guard throughout
  • HD Work Light
  • Electrics & controls are CSA/UL Standards and are 230/460

Striebig Compact Vertical Panel Saw 
  • Cuts up to 5' x 10' panels
  • Free standing, one-piece fully welded frame
  • Heavy-duty support rollers with integral panel stop assembly
  • Full-length center support shelf adjustable spacing for fingers
  • Built-in small parts support
  • Special measuring stop for use with small parts
  • Automatic, mechanically upward shifting support grid to keep off cuts from binding grind
  • TRK dust system exceeds European standards. Note: requires an external collector
  • Cutting stations 40 inches on center (1 meter optional)
  • Equipped with 5-1/4 hp, 220/440* volt, 3 Phase motor with electric brake
  • Noise protection below 80 db (Super Silent)
  • 250 mm (9-7/8") HFG carbide saw blade
  • Template bar accepts optional stops for setting common rip cuts
  • Optional repeat rip device for strip cutting from top of panel
  • Auto-engaging splitting wedge
Regular price $41,000.00
Casadei Libra 45RTC135

53" wide 2-head Drum/Platen
1/4" - 6-1/2" Thickness
53" x 85" Belt size
Variable Speed Feed 11 - 60 FPM
30HP First head
18HP Second head
Auto-thickness setting
Inclusion/Exclusion of sanding heads at control panel
Many more options...click here for more detail 

 
SPECIAL STOCK MACHINE PROMO PRICE $36,900.00 
ALSO REPRESENTING;
  • Joos USA - Hot Presses & Veneer Equipment.  Mayer CNC Panel Saws
  • Doucet Machinery; Clamp Carriers, Return Conveyors, Assembly Clamps, Special Application Machinery
  • Superfici America: Finishing Systems and DMC Sanders
  • US Concepts: Arch Shapers, Profile Denibbers
  • GDP Guhdo - Leader in automation tooling
  • Ogden Group: RF Gluing Equipment, Ogden Frame Saws
  • Vitap Contour Edge Banders
  • Voorwood Shape & Sand Machinery
  • Star-V Machinery: V-Groovers
  • LEWCO Conveyor

Demo Showroom & Office

7795 Lochlin Dr. Suite B4
Brighton, MI 48116

Phone: 248.437.4738

E-Mail: machinesales@jklmachinery.com

LET US KNOW IF YOU PLAN TO ATTEND

Registration is not necessary but helpful for  planning.
Click here if you would like to let us know you are coming.

  JKL Machinery | (810) 623-6538  | machinesales@jklmachinery.com | www.JKLMachinery.com
STAY CONNECTED: