PMI Extrusion Saws and FMB Band Saws

May 3 & 4 Spring Open House - Click to register

All Machinery is Under Power
                                                           
FMB Solar vertical tilt bandsaw
  • Semi-automatic vertical band saw machine for cuts  from
      0° to 60° right and from 0°to 60°left, with automatic cutting angle setting.
  • Blade inclined by 4.5° to the plane to facilitate the cut of
      profiles.
  •  Hydraulic movements.
  • Maximum capacity at 0° : 560 height x 460 base.
  • Material clamping vice moving hydraulically
  • Head rotation by hydraulic cylinder with angle view on display.
     
  • Control panel in frontal position with push-buttons panel and  PLC inside.
  • Electronic inverter VHZ for a wide range of blade speeds.
     
 
FMB Saturn Band Saw 
  • Semi automatic band saw machine for cutting from 0° to 60° right and from 0° to 45° left, of profiles or full of medium dimensions
  • Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
  • Balanced valve that controls the hydraulic cylinder of head descent. Inverter VHZ for a wide range of speed selection (16 ÷100 m/min)
  • VHZ for a wide range of speed selection (16 ÷100 m/min). Motor wheel fixing to a flange group with exact opposite conical bearings
  • Head rotation with mechanical stop at 0° right and at 45° and 60° left, graduated scale for angle reading and strong locking lever. Vice translation from right to left on linear guides and locking positioner
     
FMB Phoenix Band Saw   
  • Manual band saw machine to cut from 0° to 60° right
  • Head structure in special aluminium casting alloy
  • Dynamometric blade tensioning
  • Blade guide with combined action of side bearings, carbide plates and top bearing
  • Direct drive: reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Mechanical variator 20÷100 m/min for version +V)
  • Material clamping vice with manual positioning and fast clamping system
  • Head rotation angle stop at 0° and 60°.Degrees measuring system, graduated scale and rugged in construction locking lever
  • Cutting length 0÷600 mm

     
PMI 14A Double Miter Saw 
with SawGear Automatic Positioner 

  • Equipped with two saw heads that are fixed at 45 degree angle so in a single saw cycle two 45 degree cuts are produced
  • Ideal saw for applications that require opposing 45 degree cuts
  • The double saw blade design provides fast cut times to greatly increase efficiency
  • Adjustable neumatic horizontal and vertical clamps can be activated automatically or manually
  • Precise micro drip blade lubrication system
  • SawGear positioner provides repeatable accurancy +/-.008"
JIH-85 Corner Joining Machine

  • The machine is suited for end jointing operation for door and window frames.

  • The clamping height is adjustable

  •  

    Automatic operation. Entire operation cycle can be fast . accomplished by simply pressing foot switches.

  •  

    Air operated workpiece clamping.

  •  

    Special punching tools are available when requested.

  •  

    Maximum workpiece height is 210MM, width up to 100 MM.

  •  

    The operation cycle is air operated.

  •  

    Convenient adjustment, easy to operating. The speed of corner jointing is very quickly and save time 2/3 than usual.

  •  

    Fit for any kind material. Applications: Window and door frame corner joint


     
PMI-20 Upcut saw with TigerStop Automatic Positioner  
  • 7.5 HP saw motor
  • Upcut design and fully enclosed saw blade chamber
  • Precision-ground worktable with special surface coating
  • Hydraulic clamping system with adjustable clamping pressure to prevent distortion of thin walled aluminum extrusions
  • Saw blade feed controlled via air / hydraulic
  • Precise micro-drip blade lubrication system
  • Vertical and horizontal clamps
     
Regular price $41,000.00
PMI-20 Automatic Miter Saw  
 
  • 7.5 HP saw motor
  • Upcut design and fully enclosed saw blade chamber
  • Precision-ground worktable with special surface coating
  • Hydraulic clamping system with adjustable clamping pressure to prevent distortion of thin walled aluminum extrusions
  • Saw blade feed controlled via air / hydraulic
  • Precise micro-drip blade lubrication system
  • Vertical and horizontal clamps
  • Fully Automatic Saws with automatic saw head rotation and automatic material indexing
  • Touch screen control for easy job setup
  • Servo motor driven pusher system
  • Saw head rotation
  • Fully automatic saw cycle
  • 100 program storage
     
 
PMI-18  DB NC Shuttle Saw 
 
  • 7.5 HP saw motor
  • Upcut design and fully enclosed saw blade chamber
  • Non-marring bake-lite table
  • Hydraulic clamping system with adjustable clamping pressure to prevent distortion of thin walled aluminum extrusions
  • Saw blade feed controlled via air / hydraulic
  • Precise micro-drip blade lubrication system
  • Vertical and horizontal clamps
  • Fully Automatic Saws with automatic saw head rotation and automatic material indexing
  • Touch screen control for easy job setup
  • Servo motor driven shuttle system
  • Fully automatic saw cycle
  • 100 program storage
     
 
ALSO REPRESENTING;
  • Joos USA - Hot Presses & Veneer Equipment.  Mayer CNC Panel Saws
  • Doucet Machinery; Clamp Carriers, Return Conveyors, Assembly Clamps, Special Application Machinery
  • Superfici America: Finishing Systems and DMC Sanders
  • US Concepts: Arch Shapers, Profile Denibbers
  • GDP Guhdo - Leader in automation tooling
  • Ogden Group: RF Gluing Equipment, Ogden Frame Saws
  • Vitap Contour Edge Banders
  • Voorwood Shape & Sand Machinery
  • Star-V Machinery: V-Groovers
  • LEWCO Conveyor

Demo Showroom & Office

7795 Lochlin Dr. Suite B4
Brighton, MI 48116

Phone: 248.437.4738

E-Mail: machinesales@jklmachinery.com

LET US KNOW IF YOU PLAN TO ATTEND

Registration is not necessary but helpful for  planning.
Click here if you would like to let us know you are coming.

  JKL Machinery | (248)-437-4738 | machinesales@jklmachinery.com | www.JKLMachinery.com
STAY CONNECTED: