Customer and Representative Newsletter
September 2013
|
| Greetings!
A warm greeting to all our Customers, Representatives and Friends with a short note to update you on Raditek's latest products.
|
 | | Click here for webpage |
FEATURED PRODUCT
RADITEK is pleased to announce ...
F1 Series Isolator
65dB Isolation, (typically> 70dB)
RADITEK's robust, high power, double junction Cellular Band 850-869MHz Coaxial Isolator: Spectacular 65dB Isolation, (typically > 70dB), 0.45dB insertion loss, 1.20 VSWR, SMA Female on input, N-Female on output with input and output monitor cables. 150Watts Reverse Power, 200Watts Forward Power and 1500Watts Peak Power.
100pcs Available for Immediate Shipment. Special Pricing
 | | NPI |
| | Datasheet |
|
|
NEW PRODUCT INTRODUCTIONS
Below are the latest NPI's (New Product Introductions) that we sent to the trade magazines.
These typically appear 2-3 months from the date they are sent.
PASSIVE Components - ACTIVE Components - SYSTEMS Products
To go to the Main NPI Web Page Click Here.
|
 | | Click here for the webpage |
RMOD-DREAM - DAMA / SCPC / Router / Satellite Modem
RADITEK's latest "Dream" satellite (1:1 redundancy optional) modem offers new levels of performance. Standing for DAMA ROUTER Easy Access Modem, this can be used as a standalone IP modem or as a multi STAR/MESH networking DAMA (Demand Assigned Multiple Access) modem/router. Standard data rate is 13 Mbps using TPC coding with modulation BPSK (from 16Kbps) to 16QAM, and to 20Mbps with same modulation features with advanced LDPC coding.
The unit has on demand Packet Switching Multiple Access (PSMA), with ABOD (Adaptive Bandwidth on Demand). It offers significant advantages over ANY TDMA modem, being very low latency, very high satellite efficiency and low hub and remote cost.
Applications include: IOTM (Internet on the move), for connection to RADITEK's IOTM vehicle mounting flat antenna giving continuous satellite tracking while on the move on the road and cross country. Plus: MESH Voice; SCADA; Disaster Recover and any Internet access. The SCPC/DAMA return channel offers the most efficient return channel in any broad band network (eg DVB-S2)..
| | Datasheet |
| | NPI |
|
 | | Click here for the webpage |
2.4m, Carbon Fiber, Tracking, Ku or C Band, Vehicle Mounted Antenna
Our RANT-Ku or C-2.4M-Rx-Tx-VMA-x15 is a complete 2.4m carbon fiber reflector based, tracking transmit and receive, vehicle mount antenna for C and Ku band. It can transmit to 300W, and has linear polarization skew adjustment as well as Az and El actuators. The unit has a self contained ACU (Antenna Control Unit) with processor, motor drivers, GPS compass, and control..
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
Ku-Band Micra GaN Block-Up-Converter
Our new 40W and 50W (rated power), Ku band, GaN based BUCs (Block Up Converter) is only 6.5 x 6.5 x 3.7 inches, and weighs only 5.5Lbs. It is half the weight and 1/3 the size of the closest competitor. It has an excellent phase noise LO and has a visible LED alarm, in the unlikely event there is a problem.
It has 24dBc C/lm(Linearity) at 44dBm, and therefore offers great linearity at GaN efficiencies (180W typical power consumption, at 3dB backoff).
It has built in output isolator, and is available in 1+1 redundancy option too. They have built in GUI with Internet based monitor and control, with both serial and analog interfaces. Switchable LO option can select standard or extended Ku band..
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
Coaxial Circulator, 2.0-2.6GHz, N Type Connectors, 350Watts, with Heat Dissipation Fins
Our Latest High Power, 350 Watt Average Power Circulator, (RADC-2.0-2.6-NX-350WR-Fins-b) operates between 2.0-2.6GHz with an Insertion Loss of 0.4dB max. 20dB of Isolation and 1.25:1 VSWR.
Forced air cooling recommended
Dimensions: (W) 86 x (D) 85 x (H) 69 mm.
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
C-Band & Ku Band, Earth Station Antenna, 6.2 Meters, Motorized
Our 6.2m satellite dish antenna, reflector incorporates stretch-formed doubly contoured panels with matched radials and hub for ease of field alignment Motorized azimuth and elevation can be used with our Raditek Antenna and Control Unit for precise satellite tracking.Meets or Exceeds CCIR 580 and INTELSAT Requirements, High G/T, Excellent Pattern Characteristics, Ground Mount Assembly, C-Band & Ku Band Antenna, 2-port, 3-port or 4-port Linear/Circular Feed, Field Changeable Feed System, Switchable Circular to linear polarization, Az 0-360deg Continuous Pointing Range.
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
Low Noise Amplifier Ku-Band 10.7-13.0GHz, (65/100)K Noise Temperature 50dB Gain, +15 to +20 VDC
Our Ku-Band LNA offers premium performance and reliability in the most versatile package available for a Ku-Band LNA. The latest technology in GaAs HEMT devices produces the lowest possible noise temperatures in an un-cooled LNA. In addition, the RF2 Series LNA is backed by a 36-month warranty and by more than 30 years experience in the design of high performance communications amplifiers.
The performance of this LNA is matched by a full range of features chosen with the communication system designer in mind. From the compact weatherproof housing to the standard circular connector DC input and optional of RF cable, this LNA is ready for integration into your system.
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
Redundant 1:1 and 1:2 Ku Band LNA, RLNA-1to2-Ku-65K-Sf-50d-p3
Our redundant LNA systems are the field-proven low noise amplifier product lines. Available in all common Ku-Band frequencies and offering state-of-the-art noise temperature performance, these LNAs can be configured for use in 1:1, 1:2 and custom redundant systems. System monitoring and control is provided through the microprocessor-based 1:1 and 1:2 redundant control panels. Dual 1:1 systems are controlled via the dual redundant control panel. LNA plate assemblies are designed for convenient integration into any antenna hub or facility with RF and user interfaces readily accessible.
Common feed interfaces are offered as standard and isolation is provided at all RF interfaces. A range of RF hardware options and custom plate configurations are offered to meet specific system requirements.
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
Antenna Control Unit , RACU-1000-q16
The Antenna tracking Control Unit is so versatile that it can even be used for extending the life by of Inclined Orbit satellites by tracking their decaying (programmable for up to 5) orbits. It works with any L through Ka band antennas, from 0.4 to 10m, for example. Of course, it is fully compatible with any Raditek antenna, as well as easily being made to be compatible with others. It offers the best tracking solution for new installations, as well as for upgrading, older systems. It has remote control drive outputs and limit inputs between the (antenna) outdoor unit and the optically coupled, indoor rack mount. Up to 38 preset satellites can be stored and fast slewing as well as fine positioning speeds. This controller is designed to allow future expansion as well, such as having extra ports for potentiometer based feed control and RF power measurement circuits, plus TTL compatible Digital inputs, and Form C relay outputs. The RACU-1000-q16 continuously monitors: Motion limits, maintenance Drive error, emergency stops and runaway conditions.
| | NPI |
| | Datasheet |
|
 | |
Click here for webpage
|
Microstrip Isolators and Circulators
Our RDKF Microstrip Isolators and Circulators cover the range from 1.7-36 GHz and are FDK footprint Compatible. These are designed to meet all of your Microstrip requirements and can be optimized to your exact frequency needs, including up to 24% bandwidth option, 2-25Watts of forward power and Loads with rated power from 0.25W up to 25W are available.. The above model shown covers 1.9-2.6GHz. Standard dimensions include drop-in replacements for FDK and TDK. All thin film circuits are gold on copper, suitable for soldering (silver solder preferred), or gold thermo-compression bonding.
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
High Stability C-Band PLL LNB
our latest addition to our SATCOM products, RLNB-C(4.5-4.8)-Nf-PLL-Nf-IR�250k-n5. Input frequency 4.5 to 4.8 GHz, L.O. frequency 5.95 GHz, Output frequency 1150 to 1450 MHz. Typical Specifications include, Noise temperature 15 to 30�K, Conversion Gain 64dB, Phase noise -65 dBc/Hz at 1kHz offset. Input VSWR 2.0:1 / Output VSWR 2.2:1 max. Temperature Range -40�C to +60�C .
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
Octave Band Isolators and Circulators, for example, RADI-4-8-N3-150WR-b
Octave Band Isolators and Circulators are a cost effective solution for wide band frequency applications. This model covers 4.0-8.0 GHz with 150 Watts of reverse power and 150 Watts of Forward Power. Power Options available are: 110, 150, 200 and 250Watts. Other Popular frequencies, 500-1000MHz, 1500-3000MHz, 1.0-2.0GHz, 2.0-4.0GHz, 3.0-6.0GHz, 4.0-8.0GHz, 6-12GHz and 8.0-18GHz. Octave Plus and Peripheral Mode units also available. Typical Specifications: 0.4dB Insertion Loss, 18dB Isolation, VSWR 1.3:1. Operating Temp. -30~+70�C. Dimensions: 83 (W) x 55.2 (L) x 21.5 (H) mm.
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
2-Way Splitter-Combiner, R2SC-1.0-7.0-Sf-1W-1kW Pk-z4
Our 2-Way Splitter-Combiner: operates from 1.0-7.0GHz, 1Watt Continuous Power, 1kilo Watt Peak Power, 1.5dB Insertion Loss, 19 dB Isolation, 1.8:1 VSWR, �0.3dB Amplitude Unbalance, 10� Phase Unbalance, -30 to +70�C Operating Temperature, SMA Female input/output Connectors.
| | Datasheet |
| | NPI |
|
 | |
Click here for webpage
|
90�Quadrature Hybrids, 200-400MHz, 250Watts
Our latest 90�Quadrature Hybrids are available in Surface Mount, Drop-In and Connectorized models. Quadrature Hybrids split 50% of input power between the two output ports with a 90� phase difference at the center frequency between the through and coupled ports. The above model operates from 200-400MHz and is a 90� Quadrature Hybrid, Gold Tab Connectors and handles 250Watts of Input Power. Specifications include: Insertion Loss 0.3dB max, Isolation 20dB min, VSWR 1.20:1, Amplitude Balance �0.5dB max, Phase Balance �2 degree. Max.
| | NPI |
| | Datasheet |
|
 | |
Click here for webpage
|
Double Junction Waveguide Isolator, WR15, 50GHz
Our new double junction waveguide isolator operating from 50.8-59.2GHz, 1Watt. Features low loss and high isolation. Typical Specifications: 0.7dB Insertion Loss, 40dB Isolation, VSWR 1.25:1. Operating at -30 to +70C Temperature, Humidity is Up to 98%. Dimensions: 1.50 x 1.0 x 8.25 inches.
| | Datasheet |
| | NPI |
|
 | |
Click here for webpage
|
650-1000MHz Coax Isolator or Circulator, 100Watts
Compact Wide Bandwidth Coaxial Circulator operating from 650-1000MHz at 100Watts.
RADC-650-1000M-N23-100WR-b, is a 650-1000MHz coaxial circulator with N-Type female connectors and 100 watts of power handling. Specifications: 0.8 dB Insertion Loss, 14dB Isolation, 1.60:1 VSWR Dimensions: 48.5(W) x 53.5(L) 20.8(T) mm
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
High Power Ka Band Waveguide Isolator
Our latest 29-31.5GHz Ka Band High Power Waveguide Isolator operates at 60Watts of Forward and 50Watts Reverse Power and has a new compact design, 23x63x25.4mm, with a WR28 waveguide flange. General Specifications for model shown: Insertion loss(0.4dB), Isolation(20dB), VSWR(1.25:1).Operating Temperature: -35~+55�C. Device should be mounted on the heatsink and the surface temperature should not be higher than +85�C. These units are proven in the field and are fully ROHS compliant..
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
High Power Coaxial Circulator
Our new High Power Coaxial Circulator operates at 1200-1400MHz Full Band.
This unit can handle 200 Watts of Average Power and 1 Kilowatt of Peak Power. N-Type Female Connectors are standard and a new compact design of 25.4x28.5x20mm.
General Specifications for model shown: Insertion loss (0.35dB), Isolation (20dB min), VSWR(1.25:1).Operating Temperature: -30~+70�C
These units are proven in the field and are fully ROHS compliant..
| | NPI |
| | Datasheet |
|
 | | Click here for webpage |
Wide band Coaxial Isolator
Our new Wide Band Isolator operates at 4-6GHz Full Band and 1 to 50 Watts of Power.
SMA Female Connectors are standard and a new compact design of 17x14x23mm.
General Specifications for model shown: Insertion loss (0.4dB), Isolation (20dB min), VSWR(1.25:1).Operating Temperature: -20~+70*C
These units are proven in the field and are fully ROHS compliant..
| | Datasheet |
| | NPI |
|
 | | Click here for webpage |
High Power GaN and LDMOS Amplifiers, Example 1.6-39MHz 5kW PEP
Our NEW family of high power GaN and LDMOS amplifiers are the most advanced available. The one shown is RAMP-1.6-39M-5KW, which delivers both Class A or Class AB (with Class A-like performance) for 5KW PEP (Peak Envelope Power) and 5KW average power too. It consists of 8 combined power amplifiers (SSPA, for better cooling, and the ALC (automatic level control) maintains full output power, even if one of the SSPAs or power supplies fails-giving it superb reliability, at no extra cost. The amplifier is so stable, that it can work into VSWRs up to 60:1 without damage! It is protected against poor VSWRs, of course. RF noise is better than 75dBc/Hz below the 5KW level. Harmonics are better than -65dBc. We can supply with an exciter if needed, with up to 20ms switching. Remote monitoring via Internet plus M&C plus extensive BITE-(Built In Test Equipment) is accessed via RS/232C, USB etc. Built to comply with MIL-STD-188-141. Please contact the factory for full specification..
| | NPI |
| | Datasheet |
|
|
