Servoflo is a premier provider of pressure sensors, environmental sensors, mass flow sensors, ssic's & micropumps for North & South America. 
November 2016 Newsletter
Pressure & Environmental Sensors, Mass Flow Sensors, Sensor Signal Conditioning & Micropumps
This month's updates include:
  • Pressure, humidity & temperature now available in FS6122 Mass Flow Sensor
  • Water level sensor FPWS 
  • Dew point SHS-A4L
  • New mp6-PI micropump arriving in 2017
  • Bartels exhibiting at the MDM West in Anaheim February 7-9
  • MS5837-02BA01 now available
  • Winter shutdown starts December 26!
4-in1 Mass Flow Sensor FS6122 for Medical Applications

The FS6122 Sensor now has the ability to measure the following parameters: mass flow, pressure, humidity & temperature. Direct measurement of mass flow and pressure is provided via a linear analog output. Humidity & temperature (optional ordering feature) data is transmitted via I2C.
  • Flow range of -250 to +250 SLPM
  • Response time of 2 ms for mass flow
  • Pressure ranges from either -5 to 40 mm H2O or -5 to 100 mm H2O
  • Temperature measurement from 0-60C
  • Humidity measurement from 0-100% rH non-condensing
  • Altitude compensated for up to 3000 meters
  • Customization is possible
Save space in your design by coming different sensors into one package!

Learn more about the FS6122
Fujikura FPWS Water Level Sensor

Servoflo is pleased to announce the FPWS Water Level Sensor. The FPWS is a gauge pressure sensor for -49 kPa to 68.5 kpa with a linear voltage output. The sensor is oil-filled for specific use in tank level measurement applications. Typical water exposure is tap water with or without bath or cleaning agents.
  • Simple, integrated connector
  • Designed for noise resistance
  • ASIC compensates for temperature
  • Customization possible
New mp6-PI for 2017

There will be a new version of the mp6 arriving in 2017! Servoflo is pleased to announce the mp6-PI, a variation of the standard mp6, with the difference being the valve foil consisting of Polyimidfoil. Polyimides are a group of plastics highly resistant to watered acids, organic solvents, fuels, fat, nicotine, odoriferous substances, aromas and oils. The mp6-PI has a cost that is in a range similar to the mp6. 

We will have mp6-pi pumps in stock in early January 2017 for small quantity orders.

Here is a short list summarizing the various mp6 pumps available:

mp6 - made with polyphenylsulfon (PPSU)
mp6-PI - the valve foil made with polyimidfoil (PI)
mp6-pp - all media-touching parts constructed of Polyproplylen (PP)
mp6-air - standard mp6 tested and calibrated for air


Or you can also download the preliminary   mp6-pi data sheet right here!
Visit Bartels at MDM West February 7-9


Visit the Bartels staff at Booth 2978 during MDM West during February 7-9 at the Anaheim Convention Center.

See the mp6 and associated evaluation kits in person and talk with micropump experts one-on-one about your application. Should you like to set up a specific appointment with the Bartels team (Frank Bartels & Monika Kremer), please contact them via email.

Barometric Pressure Sensor for 3-1200 mbar

MS5837 Gel Filled Pressure Sensor
The MS5837 is a high resolution pressure sensor with an I2C bus interface. The MS5837-02BA01 model is calibrated from 3-1200 mbar and has an altitude resolution at sea level of 13 cm of air. The sensor module includes a high linearity pressure sensor and an ultra low power 24 bit ADC with internal factory-calibrated coefficients. It provides a precise digital 24 bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation in depth measurement systems and thermometer function without any additional sensor. The communication protocol is simple, without the need of programming internal registers in the device. The gel protection and antimagnetic stainless steel cap make the module water resistant. 

Key features include:
  • Ceramic - metal package, 3.3 x 3.3 x 2.5 mm
  • High resolution module 0.2 mbar
  • Fast conversion down to 0.5 ms
  • Low power, 0.6 µA (standby less than 0.1 µA at 25°C)
  • Supply voltage 1.5 to 3.6 V
  • Higher calibration model MS5837-30BA01 available for 0-30 bar
Upcoming Winter Shutdown & Happy New Year!

Please be advised that Servoflo will be closed starting December 26 and reopening on January 3. We ask that you plan your shipments accordingly and contact us as soon as possible regarding your orders if you need any dates changed.

We are most grateful for our customers that we have served over the years. We wish you a peaceful and prosperous New Year!
Other Industry Leading Products From Servoflo
Servoflo Corporation | 781-862-9572 | info@servoflo.com | www.servoflo.com
STAY CONNECTED WITH SERVOFLO: