This Weeks News Letter Focuses On...
Coaxial Isolators and Circulators 26MHz -50GHz Part 2
Dear ,
Ferrite isolators and circulators to satisfy specific system requirements for reliability, cost, and size.
Optimally tuned to the highest specifications, they contain all the necessary matching and tuning elements in a shielded housing.
Our portfolio ranges from customized niche products to standard devices for :
- Satcom BUC's LNB, LNA, Tranceivers, Amplifiers, Modems, all bands: L, S, C, X, Ku, Ka
- Point to Point Radios: 2G, 4G, 6G, 7G, 8G, 18G, 24G, 26G, 38G
- TV Transmitters band I, III, IV and V VHF and UHF
- FM broadcasting Transmitters: 88-108MHz
- Mobile and Cellular PCS, WLAN, WiFi and WiMax radio base stations
- Filters, Couplers, Splitters, Combiners
- Amplifiers 10KHz to 96GHz, mille Watts to Kilo Watts
|
OCTAVE / OCTAVE PLUS:
Cost effective solution for wide band frequency applications.
Popular Octave frequencies,
500-1000MHz, 800-2000MHz,
1500-3000MHz, 1.0-2.0GHz,
2.0-4.0GHz, 3.0-6.0GHz, 4.0-8.0GHz, 6-12GHz and 8.0-18GHz
Popular Octave Plus frequencies,
1.0-2.5, 2.0-6.0GHz, 4.0-12.0GHz, 6-18GHz and 8.0-18GHz
.
|
PERIPHERAL MODE ISOLATORS:
Featuring the revolutionary / unique 2.0-18.0GHz Full Band Isolator
Ultra Wideband Peripheral Mode multi octave Isolator.
Standard
Frequency Bands:
1-3GHz, 1-4.3GHz, 2-6GHz, 2-8.2GHz, 3.2-8.3GHz and 8-18 GHz
.
|
CRYOGENIC:
Cryogenic Isolators and Circulators
for Radio Astronomy,Radiometers and Electrical spin resonance measurement systems, Super Computers.
Two Models Operate at 0.2 to 4.0 degrees Kelvin. (-272.8 to -269 degrees Centigrade)
or 4-77 degrees Kelvin. (-269 to -196 degrees Centigrade)
Standard Specifications are as follows: Frequency, 4.0-8.0 GHz | Insertion loss, 0.4 dB | Isolation, 18dB | VSWR, 1.30:1 | Rated power (forward), 10 Watts | Rated power (reverse), 1 Watt | Operating temperature, 0.2-4.0ºKor 4-77 ºK | Non operating, -42 to 85 ºC | Finish, Bright Nickel plated finish. Dimensions: (w) 28.6 x (h) 48.2 x (t) 16.5 mm
Other Frequencies:1.35-1.75GHz, 1.75-2.6GHz, 3.-8GHz, 5.35-6.35GHz, 8-12GHz.
|
 UHF:
FF1 Series
is a 380-515MHz, 10% Bandwidth Isolator or Circulator with 100 watts forward and 10 watts reverse power handling typical. Operating over the full temperature range of 20 to +80°C with dimensions of 22 X 45.47 X 15.24 millimeters. Specifications over temperature are insertion loss 0.4dB, isolation 22dB, and VSWR 1.2:1 maximum
|
CELLULAR PCS:
dd1 / ee1 Series Isolators and Circulators
640MHz-2.5GHz at 10-20 % Bandwidth, most economical for PCS, Cellular, DMB, and Wi-Max applications.
These cover -20 to +85 degrees C. SMA or N-Type Connectors available. It has better than 20 dB return loss and 21 dB isolation, and can handle 120W forward and 35W reverse power and up to 500W peak power..
|
WiMax and LAN: 
Coaxial Circulator or Isolator, 2.0-6.0GHz, Split Bands.
N-Type Connectors,
2, 50 or 100 Watts
2.0-3.0GHz
2.3-3.9GHz
2.5-6.0GHz
Typical Specs:
<0.5dB Insertion Loss
>18dB Isolation
<1.35:1 VSWR
|
MICROWAVE:
bb1 Series Isolators and Circulators
5.8-27 GHz at 10-20% Bandwidth.
These cover 1-2 Watts Reverse power and 10 Watts Forward power. Connector options include SMA, 3.5 and 2.9(K)...
|
|
|
© Copyright 2016 RADITEK inc. All rights reserved.
|
|
|
|
|
