SHARE:  

Hello friends of SBS4DCC,

WOW.  2019 has come and gone.  I usually do a New Years edition of the newsletter but I am a little behind on new product announcements so I figured a year end recap was in order.

Thank you for your patience and understanding in 2019.  One new job, three new addresses, seven U-Haul loads... all for an out-of-state relocation...  What a year.  Thank you for your patience and understanding.  This New Address is permanent, the dust is finally settling, a new and improved Backshop... with a new layout... is under construction.  2020 should be a great year.

This edition brings lots of great news and new products for DCC so read on.  The new stuff is always easy to find in the store by simply reviewing the  2019 New Products category.  These categories highlight new products added, not just the new releases, so they are always worth a look.   I also cheated the clock and put a couple items in the  2020 New Products  since, well... that's like tomorrow.  Happy New Year!

Be sure to check out the Tutorials, Tips and Tricks section of the website.  I continue to add volumes of information about different subjects I think you might find valuable.

And finally...I encourage you to reach out to your local NMRA chapter about local operating sessions and try it out... just once.  Model Railroad Operations are a blast and are a great way to get engaged in this great hobby.  You can find out more by visiting the OpSIG webite as well.

Stop Running Trains.  Start Model Railroading!

Bryan Vianco
Owner, SBS4DCC


Featured Product


ESU 41010 Premium Foam Train Service Tray


The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available: The locomotive can be supported upside down to comfortably get to the underbody. Or in the inclined tray, you can easily work on the side of the body. You can also set up the locomotive almost vertically. This works great for decoder installs!

This great new product and the entire  ESU catalog is always in stock at Streamlined Backshop.



SBS4DCC


SBS4DCC Tutorials Tip and Tricks

I have added new content to the  SBS4DCC Tutorials Tips and Tricks library to help explain the complexities of DCC.  The new content includes: 



NixTrainz "Decoder Buddy" Application Notes

I hope you find the information useful. 



Digitrax


Digitrax DCC DCS52 Zephyr Express Starter Set All-in-one Command Station/Booster/Throttle


Digitrax has released the DCS52 Zephyr Express.  The  Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price.   It offers simplified advanced train operation for any size layout and is fully expandable.   You won't have to start over when you want to do more with your railroad.

DCS52 Zephyr Express Offers:
  • Cost effective entry level LocoNet Compatible system
  • Color 2.4" LCD Screen
  • Large Backlit Keypad
  • Speed control knob and direction switch with brake
  • Integrated USB Computer Interface
  • Easy 2 and 4 digit addressing
  • Smooth speed control
Be sure to check out their full line of  Digitrax Complete Train Control Products to add more realism to your model railroad empire.

These great new items are available now from  Streamlined Backshop !



ESU LokSound


ESU 50012 ECoSBoost ECoS Signal Booster 7A MM/DCC/SX/M4


The new model is suitable for use with most ESU Command Stations including the: 



Of course this and all of the Great ESU Products are always in stock at SBS4DCC!



ESU 51956 LokSound 5 L Blindplug with pin connectors, Universal

The new  ESU 51956 LokSound 5 L Blindplug with pin connectors, Universal is a  dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems.

Of course this and all of the Great ESU Products are always in stock at SBS4DCC!



ESU 54677 Smoke Unit Dual (Exhaust + Cylinder) (Gauge 0) for LokSound XL

The new  ESU 54677 Smoke Unit Dual (Exhaust + Cylinder) (Gauge 0) for LokSound XL is suitable for vehicles of the nominal sizes Gauge G, Gauge 1 but also for larger vehicles in Gauge 0. In contrast to the two other smoke generators from ESU, both exhaust steam and cylinder vapor are integrated in one housing. Thus, you can finally retrofit your older locomotives with a realistic cylinder steam

This new product and all of the Great ESU Products will be in stock soon at SBS4DCC!



NCE


NCE Next18 DCC Decoder - NEM662 Next18 Integral Connector

The new NCE Next18 DCC Decoder - NEM662 Next18 Integral Connector is a direct plug in to locos equipped with Next18 (NEM-662) interface socket.
 
Features of this decoder:
  • Silent Running ,torque compensated motor drive
  • Torque Compensation for ultra smooth low speed performance
  • Motor rating .75 Amp continuous, 1.2 Amp stall
  • All four function outputs have lighting effects generators
  • Select from 15 different lighting effects
  • Full support for LED lighting
  • Decoder programming lock mechanism


SoundTraxx


Soundtraxx 852005 MC1H104P21 Mobile DCC Decoder - NEM660 21MTC Integral Connector

The new Soundtraxx 852005 MC1H104P21 Mobile DCC Decoder - NEM660 21MTC Integral Connector is a new mobile decoder that easily plugs into many Athearn or other manufacturers' models equipped with a 21 pin motherboard. This decoder is also compatible with other SoundTraxx mobile decoders and products.

This decoder is a perfect mate for the non-sound units that run with Tsunami Sound Decoders.



Soundtraxx 810090 Speaker 50x90mm Rectangular 8 ohm 5.0 watt

The new Soundtraxx 810090 Speaker 50x90mm Rectangular 8 ohm 5.0 watt is one of our largest speakers for use with the TSU-4400 in O-scale or larger models.
  • Dimensions: 50 x 90 x 37.5mm(D)
  • Frequency Response: 230Hz - 20kHz
  • Peak Power: 5 Watts
  • Impedance: 8 Ohms


Team Digital


Team Digital DCC Accessory Controllers

Team Digital has announced  that the SHD2 is being discontinued. No replacements are planned at this time. .



TCS - Train Control Systems


TCS Decoder Keep-Alive Devices

Train Control Systems has rereleased several models of their famous Keep-Alive Devices.  The new models reuse previous designations but have been redesigned into a smaller footprint that requires less space in the installation.

The new models include:


TCS 1455 KA1-C DCC Decoder Keep-Alive Device with 2-Pin Quick Connector Harness


TCS 1457 KA2-C DCC Decoder Keep-Alive Device with 2-Pin Quick Connector Harness

Of course these new models and every  TCS WOW Kit is  in stock and ready to ship at  Streamlined Backshop .



TCS 1694 28mm (1.10") High Base Round WOWSpeaker 8 Ohm 4W


This speaker handles an unprecedented 4 watts of power, and showcases a mighty bass reflex that packs a big sonic punch. Welcome to the new standard for sound in model trains - pick one up today and prepare to be blown away!

Specifications:
  • Dimensions: 1.1" diameter x 0.53" or 28mm diameter x 13.5mm
  • Sound Pressure Level: 84 ± 3.0 dB (A), at 0.63 V, 0.1 m, Average 500,1,000, 2,000, 4,000 (Hz ), at 25°C
  • Effective Frequency Band: 250 Hz. to 20 kHz.
  • Power Rating: 3W (Typical) 4W (Peak)
  • DC Impedance: 4 Ω ; ± 15%, at 1,000 Hz., 1.0 V


TCS 1694 28mm (1.10") High Base Round WOWSpeaker 8 Ohm 4W




ZIMO


ZIMO MX617 Sub-Micro DCC Decoders

ZIMO has released the  MX617-series of Sub-Micro DCC motor decoders.  The new models are small but full of great features.

The new decoder measures up at just .52 x .36 x .102 inches (13 x 9 x 2.6 mm)... 

Basic Specifications include:
  • 0.8A Continuous-1.5A Peak Power
  • 6 - Normal Function Outputs
  • 0.5A Total current with overload protection

ZIMO has a DCC decoder for any scale, Z to G...



Flag Stop...

What YOU See Is What I Have


 
Welcome to SBS4DCC ...

Featuring 
Real-Time Stock Status  Reporting

 

SBS4DCC Products

SBS4DCC "Sugar Cube" Speakers

... the SWEETEST speaker available today!

4 Sizes ... 16 Baffles

64 Sweet  S peaker Options  


  





SBS4DCC Wheel and Axle Wipers

... Add Power Pickup to your models

Z, N, and HO Scale versions

Wheel and Axle Wipers


DCC Tools


Good Deals DCC "The Programmer" Test And Programming Track

Perfect for clubs, modulars, or workbenches, the  Good Deals DCC "The Programmer" is a portable, durable, convenient testing and programming track.  It is available in nearly every scale from N to O as well as combination scales for those who love trains of all sizes.

Custom designed units are also available.





Model Railroad Technologies Accutrack II Train Speedometer

The MRT Accutrak II Speedometer is a free standing, battery operated scale speedometer.

MRT Accutrak II Features:

Ideal for DCC speed matching DCC

Operates on 2 AAA batteries

Scale Selectable - N (1:148 and 1:160) or OO/HO (1:76.4 and 1:87)

Display in mph or kph



DCC Specialties RRampMeter 
DCC Amp/Volt Meter

The RRampMeter is a multimeter designed to accurately measure the  voltage and amperage output of DCC command stations.

The RRampMeter is used to:
  • Measure locomotive stall current
  • Report command station or booster  voltage and amperage consumption
  • Troubleshoot electrical problems
  • Create and edit custom sound file
Available in 4 models. 

ZIMO MXTAPS DCC Decoder Test and Connector Board

  The ZIMO MXTAPS is a stand-alone DCC Decoder Test Station compatible with any brand of decoder or command station.

Connections:
Quick Terminal
Next18 NEM661
6-Pin NEM651
8-Pin NEM652
PluX NEM658
21MTC NEM660

Features:
15 Function LEDs
5-pole Motor
13x18mm Speaker

Large scale MXTAPV version also available

ESU 53900 LokTester V2.0 DCC Decoder Test Station

The ESU LokTester is a stand-alone DCC Decoder Test Station compatible with any brand of decoder or command station.

Connections:
Screw Terminal
Next18 NEM661
6-Pin NEM651
8-Pin NEM652
PluX NEM658
21MTC NEM660

Features:
6 Function LEDs
5-pole Motor
20mm Speaker

L and XL Expansion Module also available







ZIMO MXULFA Decoder Update
Module with LCD Display

The ZIMO MXULFA Decoder Update Module is a communication device to connect your decoder to a PC to simplify programming and to facilitate firmware and sound file updates..

The ZIMO MXULFA is ude to:
Works only with  ZIMO products .



ESU 53452 LokProgrammer Set


The ESU LokProgrammer Set is a communication device to connect your decoder to a PC to simplify programming and to facilitate firmware and sound file updates.

The ESU LokProgrammer is used to:
  • Update decoder firmware
  • Edit CVs on any ESU product
  • Load downloadable sound files
  • Create and edit custom sound file
  • Test Decoder Installations
Works only with ESU products

Markers


 
And don't forget I carry a fantastic selection of DCC products from all of the
best manufacturers including Digitrax, DCC Specialties,
 
Visit SBS4DCC today!


Streamlined Backshop
www.SBS4DCC.com
sales@sbs4dcc.com