You have been around on-site power for a while. You know all the basics, and more. But just how knowledgeable are you? Here is a quick test; see how many questions you can answer!
  1.  What rpm does a 12 pole generator need to rotate to produce 60Hz?
     
  2. Are paralleling generators more stable if droop is used?
     
  3. What is J1939?
     
  4. What mode of genset operation can eliminate a utility's peak demand charge?
     
  5. What is PID?
     
  6. When would you use a soft load transfer switch?
     
  7. What would be the full load current of a generator set rated at 2,000kW, 480V?
     
  8. What is the difference between lean-burn and rich-burn spark ignition engines?
     
  9. Is 60 dBA half as loud as 120dBA?
     
  10. Who has jurisdiction over noise regulations?  
Are you confident that you answered all the questions correctly?

Yes? - Congratulations!
 
Not quite? 
Industry experts from EGSA member companies will be covering these topics in detail at the next George Rowley Advanced School of On-Site Power Generation in Scottsdale, AZ. April 9 - 12. Now is the best time to make your air reservations to Phoenix (PHX) and register for the school.
Click here to see how much you could increase your knowledge of on-site power generating systems. 

Click here to download the registration form.

And remember, there are savings available if your company sends several people to the same school vs. sending them to separate schools.

Do you have 10 or more people that would benefit from more On-Site Power Generation knowledge?

We can bring the school to you!  

Contact Michael Pope at   m.pope@egsa.org  to discuss.
The Electrical Generating Systems Association
1650 South Dixie Highway
Suite 400
Boca Raton, FL 33432
(561) 750-5575  e-mail@egsa.org