Greetings from the subtropical State of Alabama.

Yeah, its hot here. And so are the latest announcements from the World Of DCC!

The COVID-19 has put a damper on the The NMRA 2020 Annual Convention and National Train Show this year. I am certain the good folks of St. Louis would have been gracious hosts to an exceptional event. Fortunately the virus has not slowed down the new product announcements from all of our great DCC manufacturers!

This edition of the Backshop Flyer will celebrate the best of great news and new products for DCC since we cannot touch and test them at The National. The new stuff is always easy to find in the store by simply reviewing the 2020 New Products category. These categories highlight new products added to the site, not just the new releases, so they are always worth a look.

As a reminder, the SBS4DCC website features Real-Time Stock Status. Please remember that orders for out-of-stock products will be delayed and restock information will be limited. The shipping status notice applies to in-stock product only.

Be sure to check out the Tutorials, Tips and Tricks section of the website. I continue to add volumes of information about different subjects I think you might find valuable.

Please continue to keep an eye on our COVID-19 Response Page for status and updates. We continue to follow the best practices and state guidelines to do our part to keep you safe.

And finally... Model Railroad Operations are a blast and are a great way to get engaged in this great hobby. Operating sessions are surely limited these days so you can use this time to enjoy the OpSIG Publications - A Compendium Of Model Railroad Operations - From Design To Implementation and get to work developing your own operating sessions. You can find out more by visiting the OpSIG webite or by contacting your local  NMRA chapter as well.

Stop Running Trains. Start Model Railroading!

Bryan Vianco
Owner, SBS4DCC
Featured Product
Introducing The Soundtraxx TSU-21PNEM8 Tsunami 2 DCC Sound Decoder

SoundTraxx has added a new decoder board to the Tsunami2 family! Introducing the TSU-21PNEM8, an 8-Function 21-pin NEM-compatible plug-in board design!

The TSU-21PNEM8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale.

You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more!

This decoder can be wired to a Current Keeper (P.N. 810140) to maintain performance over dirty track and switches.

Be sure to read about Tsunami 2 Speaker Selection here.
Digitrax
Welcome to Digitrax Complete Train Control®
Digitrax DCC EVOX
Evolution Express Advanced 5A/8A Starter Set
Everything you need to get started with Advanced Digitrax Command Control.  Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features. Take it to the Max with Evolution Express!


  • DCS210+ Command Station/Booster With Intelligent AutoReverse
  • DT602 Super LocoNet Throttle
  • UP5 Universal Panel
  • PS615 Power Supply
  • Evolution Express Manual
Digitrax DCC EVOXD Evolution Express Advanced 5A/8A Duplex Starter Set
Everything you need to get started with Advanced Digitrax Command Control.  Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box. It offers excellent speed control, prototypical consisting, the full range of programming features and much more. Maximum capacity, maximum features. Take it to the Max with Evolution Express!


  • DCS210+ Command Station/Booster With Intelligent AutoReverse
  • DT602D Super LocoNet Throttle
  • UR93 Duplex Radio Transceiver Panel
  • PS615 Power Supply
  • PS14 Power Supply (For UR93)
  • Evolution Manual

UR93 Duplex Radio Transceiver Panel

  • Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
  • More than double the radio range of UR92 Duplex units.
  • Plug and Play setup, PS14 Universal power supply included.
  • Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception.
  • Status LEDS.
  • Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles.
  • UR93E available for countries that require EN-300-328 Wireless conformity.
Digitrax DCC DT602 Family
of Advanced Super Throttles
The  DT602 Advanced Super Throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.

Available in standard tethered or Radio Duplex.  The  DT602 is designed to handle nearly every aspect of layout control.

With the  DT602 you can run trains, create consists, set up routes, control up to 29 functions including sounds and so much more. With the soft On/Off switch and advanced power saving modes you can now operate longer than ever.

All  DT602s are factory equipped with Infrared capability. Just add a  UR90 and you can use infrared for wireless operation.

The  DT602D is our top-of-the-line, Duplex Radio Super Throttle.  DT602Ds are equipped with Duplex Radio, using existing  UR92’s for operation.

Features:

  • Works with compatible LocoNet systems
  • Color 2.4” LCD Display Screen
  • Advanced menu system and displays
  • Built-in scrolling help and prompting
  • Soft ON/OFF switch, with zero OFF power-drain
  • Advanced display Power Saving for longer wireless battery operation
  • No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
  • Can use recharged AA batteries
  • Available in standard tethered or Radio Duplex
  • Duplex Scan for available Networks and radio signal strength. Run without cords!
  • All throttles come with a LocoNet cord that can be unplugged, and is replaceable
  • Dual throttle controls let you control two locos simultaneously
  • Run locomotives with “encoder click” knobs for both speed and direction control
  • Full numeric keypad makes loco selection simple
  • Control light and sound effects functions with the press of a button
  • Control 29 functions (F0-F28).
  • Function active/inactive indicators
  • Convenient step-by-step throttle option set up
  • Supports simplified decoder programming
  • Simplified 2 or 4 digit addressing setup
  • Over 9,000 locomotive decoder addresses
  • Supports turnout and stationary decoder control
  • Over 2000 turnout decoder addresses
  • Fast clock display
  • Recall feature
  • Advanced Route editor
ESU - Electronic Solutions Ulm, GmbH
ESU 50097 L Net Converter - ECoS Throttle Integration Adapter
The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld throttles and feedback modules. The ECoSniffer input offered at least a solution for handheld throttles (in combination with „older"digital command stations), whereas the feedback modules couldn’t be integrated into the system.

For the first time, it is possible to connect Uhlenbrock® or Digitrax® handheld throttles directly to the ECoS or Central Station 60212 „Reloaded", thanks to the ESU L Net Converter. Additionally, you can continue to use feedback devices which support the well-known Loconet® communication protocol.
The ESU L Net Converter has been available for years in Europe and is finally available in USA and in stock at SBS4DCC!
All New! ESU LokPilot 5

Most Models Are Now In Stock at
SBS4DCC and Ready To Ship!
All New! ESU LokPilot 5 L
ESU  has expanded their line of  LokPilot  motor control decoders to include the   L series  and is suitable for O and G scale applications where sound is not desired.

In typical  ESU  fashion, they offer models compatible with Multi-protocol (DCC/MM/SX/M4) and  DCC-only protocol  communication software.

Click here for the full selection of L series   models.

New ESU LokPilot 5 Standard
ESU has updated their Standard series of LokPilot motor control decoders which are suitable for HO S and O scale applications where sound is not desired.

Click here for the full selection of Standard series models.
New ESU LokPilot 5 Micro
ESU has also updated their Micro series of LokPilot motor control decoders which are suitable for N and HO scale applications where sound is not desired.

Click here for the full selection of Micro series models.
All New! ESU LokPilot 5 FX Micro
ESU has also updated the FX series of LokPilot function only decoders which are suitable for Z N HO S and O scale applications where motor control and sound is not required.

Click here for the full selection of FX series   models.

Of course this and all of the Great ESU Products are always in stock at SBS4DCC!
NCE Corporation
NCE N14A3 DCC Decoder Atlas Drop-In Board Replacement
The NCE N14A3 DCC Decoder Atlas Drop-In Board Replacement is a direct drop-in replacement for Atlas GP39-2, Intermountain SD40-2 plus other plug-and-play N Scale locos.
NCE DCC AR10 Auto Reverser with Circuit Breaker
The NCE DCC AR10 Auto Reverser with Circuit Breaker is an automatic reverse loop controller for DCC layouts.

It requires just 4 connections, two to the main line and two to the loop.

In addition it functions as a circuit breaker for the reverse loop.

Recommended for DCC systems from 1 to 10 Amps.
SBS4DCC
SBS4DCC 0402 - 5050 SMD Warm White and Red LED Pre-Wired 32ga Flex Wire and Resistor
SBS4DCC has added a complete line of Pre-Wired LEDs in Warm White and Red that feature 32ga plastic coated, highly flexible wire and 1500 ohm resistor already attached.

The new line is available in a variety of standard SMD sizes ranging from 0402 to 5050.
NEW! SBS4DCC 0201 Nano SMD Warm White LED Pre-Wired 38ga Magnet Wire
SBS4DCC has added new sizes of Pre-Wired LEDs in Warm White that feature 42ga enamel-coated magent wire leads.

The new sizes include the 0201 Nano for submicro applications as well as larger sizes for larger models including the 3528 and 5050.
SoundTraxx
Introducing The Soundtraxx TSU-PNP8 Tsunami 2 DCC Sound Decoder
SoundTraxx has added a new decoder board to the  Tsunami2 family! Introducing the  TSU-PNP8, an 8-Function PNP board design!

The  TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale.

You will feel like you are in the cab with the amazing new features that  Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more!

This decoder includes a connector to easily add a  Current Keeper (P.N. 810140) to maintain performance over dirty track and switches.
TCS - Train Control Systems
TCS UWT-100 Universal WiFi Throttle

The UWT-100 Universal WiFi Throttle from TCS is the new standard in WiFi control for model railroads. This throttle brings a new level of ergonomic comfort and operational convenience to handheld controls. Instead of spending time with your head in a manual trying to understand your throttle, the intuitive interface of the UWT-100 allows you to focus on the important things - operating and enjoying your trains!

Engineered to work with most current DCC systems, and increase adoption and use of LCC, this throttle relies on the robust and universal standard of WiFi communication and leaves outdated control systems behind. The UWT-100 can be conveniently updated from the comfort of your own home, meaning you'll always have access to the newest features and your handheld won't quickly pass out of date. We are confident that the UWT-100 will quickly become your favorite throttle to use.
ZIMO DCC
ZIMO MX660 Micro DCC Sound Decoder - Universal Board-style Hardwire with Large Solder Pads
The MX660 is the universal board-style hardwire "micro model" for N scale sound in the ZIMO decoder range. The MX660 is essentially the MX649 laid out flat with absolutely nothing on one side of the circuit board to allow mounting against any surface. This revolutionary new format is perfectly suited for N scale narrow hood diesels and other applications where height and width are limiting factors.

The board-style format is only 9.6mm wide and 2.5mm thick and is blank on one side. It features a robust 0.8A motor circuit, 1W amp, 6 function outputs with unique constant current design, and connections for external energy storage, especially important for uninterrupted sound. The large solder pads make it easy to terminate hardwire connections from the track pickup, motor, and lighting functions. As with all ZIMO sound decoders, the MX660 features an on-board energy storage capacitor and direct connections for additional off-board energy storage capacitors for the sound processor to minimize interruptions in playback caused by poor power pickup. Best of all, the function outputs utilize a revolutionary design that eliminates the need for external resistors making it perfect for use with typical 3.2fV LED's. The on-board capacitor and output design eliminate the need for additional components that consume valuable space.

The MX660 is the perfect micro sound decoder for narrow hood diesels because it is the thinnest sound decoder on the market today, measuring just 2.5mm tall. The footprint is so compact, it fits easily into almost any Kato, Athearn, Atlas, Intermountain, or other narrow hood N scale diesel. The MX660 will be perfect for compact HO scale models as well.
Flag Stop...

What YOU See Is What We Have
 Welcome to SBS4DCC ...

Featuring  Real-Time Stock Status  Reporting
SBS4DCC Products
SBS4DCC "Sugar Cube" Speakers

... the SWEETEST sounding speaker available today!

4 Sizes ... 18 Baffles

72 Sweet Speaker Options
SBS4DCC Wheel and Axle Wipers

... Add Power Pickup to your models

Z, N, and HO Scale versions

  • Wheel and Axle Wipers
DCC Tools
Good Deals DCC "The Programmer" Test And Programming Track
Perfect for clubs, modulars, or workbenches, the Good Deals DCC "The Programmer" is a portable, durable, convenient testing and programming track. It is available in nearly every scale from N to O as well as combination scales for those who love trains of all sizes.

Custom designed units are also available.
ZIMO MXULFA Decoder Update Module
The ZIMO MXULFA Decoder Update Module is a communication device to connect your decoder to a PC to simplify programming and to facilitate firmware and sound file updates.

The ZIMO MXULFA is used to:

  • Mini DCC System and Update Tool
  • Update ZIMO Decoder Sound Files
  • Update ZIMO Decoder Software
  • Update ZIMO Decoder CVs
  • Test Decoder Installations
  • ZSP PC Software Interface
  • Works only with ZIMO products
ESU 53452 LokProgrammer Set
The ESU LokProgrammer Set is a communication device to connect your decoder to a PC to simplify programming and to facilitate firmware and sound file updates.

The ESU LokProgrammer is used to:

  • Update decoder firmware
  • Edit CVs on any ESU product
  • Load downloadable sound files
  • Create and edit custom sound file
  • Test Decoder Installations
  • Works only with ESU products
ZIMO MXTAPS DCC Decoder Test and Connector Board
The ZIMO MXTAPS is a stand-alone DCC Decoder Test Station compatible with any brand of decoder or command station.

Connections:
  • Quick Terminal
  • Next18 NEM661
  • 6-Pin NEM651
  • 8-Pin NEM652
  • PluX NEM658
  • 21MTC NEM660

Features:
  • 15 Function LEDs
  • 5-pole Motor
  • 13x18mm Speaker

Large scale MXTAPV version also available
ESU 53900 LokTester V2.0 DCC Decoder Test Station
The ESU LokTester is a stand-alone DCC Decoder Test Station compatible with any brand of decoder or command station.

Connections:
  • Screw Terminal
  • Next18 NEM661
  • 6-Pin NEM651
  • 8-Pin NEM652
  • PluX NEM658
  • 21MTC NEM660

Features:
  • 6 Function LEDs
  • 5-pole Motor
  • 20mm Speaker

L and XL Expansion Module also available
Model Railroad Technologies Accutrack II Train Speedometer
The MRT Accutrak II Speedometer is a free standing, battery operated scale speedometer.

MRT Accutrak II Features:

  • Ideal for DCC speed matching DCC
  • Operates on 2 AAA batteries
  • Scale Selectable - N (1:148 and 1:160) or OO/HO (1:76.4 and 1:87)
  • Display in mph or kph
DCC Specialties RRampMeter 
DCC Amp/Volt Meter
The RRampMeter is a multimeter designed to accurately measure the voltage and amperage output of DCC command stations.

The RRampMeter is used to:

  • Measure locomotive stall current
  • Report command station or booster voltage and amperage consumption
  • Troubleshoot electrical problems
  • Create and edit custom sound file
  • Available in 4 model
Markers...
And don't forget we carry a fantastic selection of DCC products from all of the
best manufacturers including:

Visit SBS4DCC today!
eMail