Message from the President
Dear M&D Members,
The mission of the division is to support the IIE manufacturing and design community in advancing the state of the art. We are reaching out to division members through multiple venues including the annual ISERC and Applied Solutions conferences, the M&D newsletter, and webinars. We have also introduced new division awards to recognize the outstanding contributions of our division members. I would like to make you aware that there are opportunities to serve in division committees that provide recommendations to the M&D Division Board.
If you are interested, please contact me or President-Elect Rohan Shirwaiker. I would also encourage members to contact us with any suggestions or recommendations for improving the value of the M&D Division for its members. I look forward to meeting you at our Town Hall Meeting at the ISERC 2016 Conference in Anaheim.
Sincerely, John Jackman
|
Register now for the IIE Annual Conference
Manufacturing and Design Division is a sponsor of two presentation tracks at the IIE Annual Conference and Expo in Anaheim, California, May 21-24, 2016: ISERC Manufacturing and Engineering Design Track, for research oriented presentations, and Applied Solutions Manufacturing and Engineering Design Track, for application oriented presentations. Hope to see you there!
|
Webinar
Impact of Visual Models On Risk Attitude And Decision Trade-offs In Aircraft Component Repair
Presented by Manufacturing & Design Division
Jan. 14 | 2 p.m. Eastern time
Presenters: James Schreiner LTC, U.S. Army and Deborah L. Thurston, Ph.D., University of Illinois, Urbana-Champaign
This webinar presents a method for using visual models to help composite aircraft component repair personnel make better decisions. Designers employ both structured and unstructured decision processes. Normative decision processes typically prevail during the early phases of product development, design and construction.
The Manufacturing & Design Division would like to thank Dr. Salil Desai for his Webinar titled "Calcium Phosphate Blended Polymer Coatings for Biomedical Implants". This Webinar was presented on March 24, 2015 and it is available on the
M&D division web site.
|
Awards
Manufacturing & Design Division has several awards and opportunities for presentations at the IIE Annual Conference.
2015 Award Recipients:
M&D Track Best Paper Award:Deborah Thurston, James Schreiner and Aaron Joseph, "Impact of Visual Models on Risk Attitude and Decision Tradeoffs in Aircraft Component Repair", University of Illinois
M&D Student Best Paper Award:Chaitanya Mahajan and Denis Cormier, "3-D Printing of Carbon Fiber Composites With Preferentially Aligned Fibers", Rochester Institute of Technology
M&D Outstanding Service Award: Iris Rivero, Iowa State University
M&D Outstanding Young Investigator Award: Rohan A. Shirwaiker, North Carolina State University
Visit the
M&D Website for more details about these awards and more ISERC 2015 Highlights, including information about the
Panel Session "NNMI: Investing in the Future of U.S. Manufacturing Competitiveness and Leadership," presented by Dr. Richard Wysk.
|
Dr Rohan Shirwaiker and Dr Iris Rivero with their awards at the ISERC 2015 |
|
Meet Your Officers
|
|
|
|
John Jackman
President
Associate Professor
Iowa State University
|
Rohan Shirwaiker President-elect
Assistant Professor
North Carolina
State University
|
Jingyan Dong
Past President
Associate Professor
North Carolina
State University
|
Lourdes Medina
Secretary
Assistant Professor
University of Pureto Rico at Mayaguez
|
|
|
|
|
Guhu Manogharan
External Relations
Assistant Professor
Youngstown State University
|
Dusan Sormaz
Media Director
Associate Professor
Ohio University
|
Iris Rivero
Advisory Board
Associate Professor
Iowa State University
|
Christopher Green
Advisory Board
Assistant Professor
Binghampton University
|
|
Stay connected
- If you are interested in delivering a webinar, please contact John Jackman.
- If you would like to be on our email list, please contact Guha Manogharan.
- We would like to invite all members to volunteer in the division activities, particularly industry members and student chapters. To volunteer send an email to the M&D Division president John Jackman at [email protected].
- The M&D board holds a monthly one-hour conference, both to discuss administrative details (approximately 20 minutes) and to conduct a roundtable discussion on a topic of current interest to IEs (20-30 minutes). All M&D members are welcome to participate. If you'd like to be added to the distribution list for these calls, please contact [email protected].
|
Manage your membership
It's easy to renew your membership, update your member record or change your member status. Just log on to the
IIE webiste or call our customer service line at 800-494-0460.
|
|
|
Manufacturing & Design Division Demographics
Looking for more information? Check out the
Manufacturing & Design Website.
|
|
|